Custom/Hybrid Best prop for low end power

[clouse22]

I have my drive train in an eme q8 hull. I have no interest in top end soeed, Im looking for the best prop for low end. I currently have a wet pipe and stock pump with the nozzle bored to 80mm.

 

[subhard]

My 10/16 hooker works good down low

 

[fastony]

Put a 650sx nozzle on it that will put you at 84mm and wait to spend the bucks on a impeller until you get more motor brap! This setup will work very good for you with good snap. You can get the nozzle setup on ebay for around $30-40. with turn nozzle.

 

[djkorn1]

Get a flywheel before a prop...the stock prop is pretty damn good, the flywheel will give you more bang for the buck on the low end.