b-pipe on lamey pv cylinder

2

2-stroketerrorist

Rev it till it blows!!!
Location
far,far away...........
hi, just about to build a new motor using a lamey stock stroke powervalve cylinder, i know people that have cut and welded their b-pipe headder to clear powervalves, and i also was told it is possible to use a spacer between the manifold and headder to clear pv's, anyone done or heard of this, hope someone can point me in the right direction
 
SuperJETT

SuperJETT

So long and thanks for all the fish
Location
none
Get Team Scream's new powervalves---very small and minimal if any mod needed for the headpipe.
 
chasingdaylight

chasingdaylight

Location
dunedin, florida
SuperJETT said:
Get Team Scream's new powervalves---very small and minimal if any mod needed for the headpipe.
Click to expand...

Are those the new ones they call the RADNEY valves?? did he come up with the idea or what?? :tapedshut:

I think the radney valves will only work with there new cylinder set up, i believe the valve is resesed into the cylinder. and yes the cap is much "shorter too".. It's worth a call (727) 442-7700
 
Last edited:
wsuwrhr

wsuwrhr

Purveyor of the Biggest Brapp
Location
Alta Loma, working in Upland
Don't be scared, get out the welder and the burr tool and get to work.

We can do this mod for you as well.

There has to be a good reason, I always wondered why Factory pipe and Dan never got together and built the pipe around the powervalves.

Brian
 
You must log in or register to reply here.
Top Bottom