FX-1 anyone make a lowered fx-1 pole bracket?

gj_fx1

gj_fx1

X-H2
Mines that way -- not a big deal but adding a bumper of some sort to prevent something from breaking should you come down hard on the pole would be a good idea.
 
F

Freestylin-FX1

gj_fx1 said:
blowsion makes one for the fx1 latch. Same bracket as a RN with the little fx1 hook screwed on.
Click to expand...

The Blowsion piece does retain the stock latch however it does need to be moved back 3/4" inch if I recall correctly. But one used!! $279 I think it was from Blowsion

Pm me with your email if you want pics of the blowsion bracket mounted with an AC pole I took a few yesterday for a guy thats interested in my ski just dont have any photoediting on my laptop.
 
special fx

special fx

X
Location
Brigantine, NJ
Hardcore...here's a couple pics of the Blowsion bracket and handlepole. I didn't know how to get you pics without posting them here, so here ya go:

I wanted to use the stock boot for the cables and stuff on the lowered bracket, so I made and adapter for the stock boot. This can be pulled out you can run the breather tube if you want?

I also have an FX-1 AC racing Aluminum handle pole that's up for grabs. It's a little beat up and the mounts for the handlepole pad are just about gone from corrosion, but it is what it is. I guess it = a -2" pole for a Superjet too. The pole comes with UMI steering and straight bars (w/throttle). Steering will need a bearing kit. $200 for pole w/steering setup.
 

Attachments

  • DSCN0139.jpg
    DSCN0139.jpg
    97.4 KB · Views: 113
  • DSCN0140.jpg
    DSCN0140.jpg
    90.7 KB · Views: 108
  • DSCN0143.jpg
    DSCN0143.jpg
    45.3 KB · Views: 103
  • DSCN0144.jpg
    DSCN0144.jpg
    66.3 KB · Views: 99
  • DSCN0145.jpg
    DSCN0145.jpg
    55.7 KB · Views: 103
bowsdelux

bowsdelux

Location
Quebec, Canada
special fx said:
Hardcore...here's a couple pics of the Blowsion bracket and handlepole. I didn't know how to get you pics without posting them here, so here ya go:

I wanted to use the stock boot for the cables and stuff on the lowered bracket, so I made and adapter for the stock boot. This can be pulled out you can run the breather tube if you want?

I also have an FX-1 AC racing Aluminum handle pole that's up for grabs. It's a little beat up and the mounts for the handlepole pad are just about gone from corrosion, but it is what it is. I guess it = a -2" pole for a Superjet too. The pole comes with UMI steering and straight bars (w/throttle). Steering will need a bearing kit. $200 for pole w/steering setup.
Click to expand...
sold?
 
You must log in or register to reply here.
Top Bottom