- Location
- Albemarle NC
anyone know where I can get replacement screws for highs with t-bar for dual 38's for a 01 rn superjet?
adjusment screw
- Thread starter tilleryrat
- Start date
Mark44
Katie's Boss
- Location
- 100% one place
John at jet ski solutions.
Mark44
Mark44
- Location
- Albemarle NC
thanks
oxnard111
Creative RE Purchasing
- Location
- so Cali, Ventura/Oxnard area
Be sure to give John specific part numbers if possible when ordering if you are ordering the "T" handle screws. You should be able to use a Hot Products part number.
He sent me the wrong screws once.
If you're ordering his larger knob style screws, you should be good without a part number.
Or if you are able to re use the stock screws, just JB weld a some thick guage wire to the ends of the screws to make your own "T" handles.
He sent me the wrong screws once.
If you're ordering his larger knob style screws, you should be good without a part number.
Or if you are able to re use the stock screws, just JB weld a some thick guage wire to the ends of the screws to make your own "T" handles.
- Location
- Albemarle NC
I will probably weld my own, checked about hot products, and they only offered for 04 and up. I think they are actually different screws.
- Location
- Annapolis, Maryland
I have a head pipe that has all of its screws seized in and no water pissing into the head. instead of trying to drill out the screws can i drill new holes and tap new screws. is that possible and would it work. Is there anyone that would offer that as a kit (T screws and tap/ or atleast know the correct tap to buy to go with the screws)?
- Location
- Annapolis, Maryland
Anyone help me on the appove question. i found the replacement screws and tap here http://www.x-h2o.com/threads/4210-F...t-there-s-more...&highlight=adjustment+screws but dont know if its been done or i should go that route.