runninAmuck
SuperJet Jake
- Location
- covina
hey guys need help with how to run the water lines on a 62t motor with a stock 701 exhaust. the head has two water ports on it. a diagram would help a lot.
Super Jet 62t with stock exhaust
- Thread starter runninAmuck
- Start date
runninAmuck
SuperJet Jake
- Location
- covina
i can only find a diagram for a 61x. basically what im reading is the line from the pump goes to the bottom fitting on the exhasut chamber. then a line from the side port to the head with a t and the third going to a pisser. now where does the port on the front of the head go ? really need help trying to test the ski today
runninAmuck
SuperJet Jake
- Location
- covina
Bump
- Location
- South Africa
is it stock head or aftermarket
stock head has a small nipple that goes to the exhaust near the front
if its a aftermarket head send that 2nd water outlet overboard with a restricter in it
stock head has a small nipple that goes to the exhaust near the front
if its a aftermarket head send that 2nd water outlet overboard with a restricter in it
runninAmuck
SuperJet Jake
- Location
- covina
i thought it came stock with with two water outlets on the head for a 62t ? the motor has been worked but my brother has the same set up in his ski but hes running a b pipe so the water routing is different. i have it hooked up that way now with the front outlet going overboard but what do you mean with a restrictor ?