61x vs 62t Stator

[michael950]

How can you tell, visibly, between a 61x and 62t stator?

And what exactly is the difference between the two?

 

[robertg]

http://www.x-h2o.com/threads/712
Second page

 

[michael950]

Thanks.

 

[Powder]

OR from all that i have ever seen the 62t coils have plastic on the ends and the 61x don't. Also the wires connect to the coils differently. post a pic and I 99.99% sure I can tell you what it is.

 

[djyox]

So as long as you keep the 62T stator and flywheel and 61x flywheel and stator together as a pair, they would work on either motor correct?

 

[LBE]

So as long as you keep the 62T stator and flywheel and 61x flywheel and stator together as a pair, they would work on either motor correct?

The flywheels and stator plates mount the same. So you can run either set up on either motor. The X stator is smaller and the flywheel is a little lighter. I believe the T is supposed to be stronger (one contiuous magnet).

I run the X's in my skis with stock lightened flywheels, lots a zip.

 

[robertg]

I thought both stators have the same wires coming out of them but one has a female and the other has a male.

 

[michael950]

I was wondering about the interchangeability of the components, and have been informed you can not take parts of a 61X and use on a 62T or vice-versa.

 

[michael950]

I thought both stators have the same wires coming out of them but one has a female and the other has a male.

Connectors are basically the same, but there are differences in size and apparently the way the pulser, etc. are made.

 

[oxnard111]

Connectors are basically the same, but there are differences in size and apparently the way the pulser, etc. are made.

On one of the wires there is a difference between x and t. One does have a female end and the other a male end.

 

[michael950]

On one of the wires there is a difference between x and t. One does have a female end and the other a male end.

Yeah, basically the same (except that one connector).