5mm stroker with 88+mm bore?

[MTRHEAD]

Sure about that?

I'm 100% sure. I've ground over 150 cylinders ,many that have won Championships, and never had I had to do as much work as with the ADA to make it perform as I have to any other cylinder.

Bottom line - you get what you pay for. It can be made to run with any cylinder out there but it requires more planning and "work"

 

[masterblaster]

I'm 100% sure. I've ground over 150 cylinders ,many that have won Championships, and never had I had to do as much work as with the ADA to make it perform as I have to any other cylinder.

Bottom line - you get what you pay for. It can be made to run with any cylinder out there but it requires more planning and "work"

so how well did the ada perform compared to others you have done

 

[McDog]

Art at Jetworks can work magic on a ADA cylinder. I was shocked at the power of my older generation cylinders and others have been shocked by it too.

 

[loictahiti]

it's old tread, but how many dollars, we have to spend for port job on these ADA cylinder kit ? I have a lot of +6 stroker (with stock lenght rod) i need some cylinder to fit with
thanks

 

[Matt_E]

I'm not sure about the port job itself, but Art Gomez at BlackJack performance is building me a complete ADA 10mm stroker (970cc) shortblock for under $5,400. That includes a new stroker crank, all case and cylinder port work, custom cut domes, etc.
I'd say that's pretty reasonable compared to other motors out there of the same size.

 

[chriselmore_1]

I'm not sure about the port job itself, but Art Gomez at BlackJack performance is building me a complete ADA 10mm stroker (970cc) shortblock for under $5,400. That includes a new stroker crank, all case and cylinder port work, custom cut domes, etc.
I'd say that's pretty reasonable compared to other motors out there of the same size.

that doesn't really seam much chapter then a dasa... Is it even possible footer those cylinders to be used stock stroke?

 

[Matt_E]

What are you talking about? A comparable DASA motor (same stroke, bore, stock cases) is about $6,200.


PS: For God's sake Elmore, proof-read your posts.

 

[chriselmore_1]

Haaahaaa. Sorry. Swype auto correct gets me sometimes.. I'm always flashing new roms on my phone so the dictionary gets deleted

 

[Matt_E]

Lol, sometimes I have to manually delete entries that Swype learned from my bad typing.

 

[ChrisFiore15]

Give art at Jetworks/Blackjack a call..
AFter changing my mind like 500 times, went with an 88mil bore with a 4 mil stroker crank...
Give him a ring and he will be glad to talk to you about all his options and what not.