2008 open class superjet

[wydopen]

that things badass

 

[waxhead]

The pole is comparable to a stock , or so it feels i havent weighed them
i would be happy with stock i just wanted to get rid of the no steering issue

 

[wydopen]

The pole is comparable to a stock , or so it feels i havent weighed them
i would be happy with stock i just wanted to get rid of the no steering issue

its a bit heavier but you get used to it..

 

[CaMo_FroG]

dear god man.... thats crazy... i hope u get this working ... i'd love to see a video of this when its done... were did u find a supercharger? btw whats the CC on that engine?

 

[Kennay]

What is making you think that single carb can deliver enough fuel to that motor in the high rpm's, let alone the extra needed for the boost?

Is that thing specially modded or what?

 

[750SX]

What is making you think that single carb can deliver enough fuel to that motor in the high rpm's, let alone the extra needed for the boost?

Is that thing specially modded or what?

I was thinking the same thing.

 

[turnagainhardcore]

That thing is going to rock!!! can't wait to see a vid!!

 

[waxhead]

Because air flow through a carburator depending on the pressure difference between the inlet and the outlet

There will be less pressure at the outlet compared to the pressure at the inlet
the greater the presure difference the more a given diameter will flow

The reality is if you push a carb to hard it will go rich anyway

The carb will choke for air before it chokes for fuel

 

[waxhead]

The engine is just under 800
it has to be to allow for the open class rules

 

[scottie mac]

There is a guy on PWCToday selling a couple of SXRs, in the pics it looks like he swiss cheesed (cut a $hit load of holes) the handlepole. I think this would work fine. The pole is all alluminum, and should hold up fine. Easy mod to take out some weight. I love the RRP pole, the adjustability is awesome.

Scottie

 

[deblaster]

Mad Max!

 

[waxhead]

well working on the ski some more
Working on the exhaust mounts
Almost there , this is one r&d exhaust that will not fall off like they are known for
Thanks to Dawson for helping me on the bracket

We had made a rave link but after fitting the exhaust it only needed a small tap and the std caps went under
Awesome

 

[waxhead]

Well the exhaust is pretty much finished now and looking great
Thanks to brad and bobby for there help in getting this finished
Since the stroker engine sits higher the exhaust required modification and i also added some substantial brackets to stop the pipe coming apart as R&D pipes are known for

 

[SXRguyinMA]

holy crap! that things nuts. where did you get a supercharger for that thing?

 

[yamahammer]

wax- i had nothing but trouble with my r&d falling apart- we built a mount similar to yours but using the stock pipe mount position farther forward with 2 lord mounts and also we went to a semi truck shop and bought peterbuilt turbo coupler and hose clamps to use in place of the r&d stuff-- you could swing the whole boat around by the pipe with a crane and it would not move-- worked great until the chamber started splitting on the welds-- probably because it was mounted too ridged--GOD DAMMIT-- oh well-- good luck with your awesome build.

 

[waxhead]

damn thats not sounding good is it
well i will just have to try and see what i can get away with
they make great power , but reliabilty lets them down

 

[waxhead]

Ok well i started the engine uptoday
been busy working on my blaster and getting that going
the superjet has been neglected
It will go to the water tomorrow
this is the first start up of the engine

YouTube - 8mm lamey pv engine first start up

 

[w-nut]

nice work wax , let use all know how the frist ride goes , sounds nice on the stand

 

[Jp116]

Any updates on this Project??

 

[waxhead]

yeah its insane on the water
I have an issue with it slowing down up top which i have traced to an exhaust manifold leaking so i have to fix that other than thats its awesome and hard to ride