Super Jet 155 pump in a Superjet

[pioui1]

Can You put 155 pump from a wave venture in a Superjet

thank you

 

[vshockey10]

Yes you can. Wdk makes the easiest pump shoe to do this. My buddy has it in his sn. Just hard to get ahold of one of the pump shoes. I just put a 155 jet dynamics pump shoe in my brawler. It was a pain in the @ss. Lots of grinding and cutting on the pump shoe. If I did it again I would find a Wdk one for sure

 

[vomitspot]

whats the advantage over the 144?

 

[Lumpy]

11mm

 

[vomitspot]

ohh well if it was 12 id prob do it but just 11 ,,, na

 

[Vumad]

whats the advantage over the 144?

My understanding is...

Larger diameter reduces pump pressure, increases the volume and the low end hit. The motor can rev faster while still pushing large volumes of water. You have a decrease in pressure and you loose power on the top end. It's the same idea as that behind putting in a stubby tail cone or boring the reduction nozzle. More volume = more GPM + more bottom end power = less top end power.

 

[kawasaki9]

Yes you can. Wdk makes the easiest pump shoe to do this. My buddy has it in his sn. Just hard to get ahold of one of the pump shoes. I just put a 155 jet dynamics pump shoe in my brawler. It was a pain in the @ss. Lots of grinding and cutting on the pump shoe. If I did it again I would find a Wdk one for sure

WDK ?? sorry what is it ? Thanks

 

[jd91t]

www.waterdawgkustomz.com
appears to be "out of stock" per their site.

 

[john zigler]

I stock OE Yamaha 155mm shoes and gaskets here for a B2 to do a conversion.

 

[davidescu_radu]

I produce this 155 pump shue for sj/am hulls - no seal ring style - like runners

 

[Jholland]

I produce this 155 pump shue for sj/am hulls - no seal ring style - like runners

Do you still produce them?