Search results

No, the aluminum one on the end of the carb. Looks like a kawi driveshaft coupler but smaller. Has two little holes in it for the set screws.

bmp

I would do a top end rebuild and a bore. It's better than waiting for it to blow and ruining cyllinders and cases...

Look in the Hotels thread. The hotels aren't really the party scene they are in Daytona...but are close to the ramps and afterparty. http://www.x-h2o.com/threads/19848-Hotel-Information

Lets just say I left one of the aftermarket linkage couplers in the sun to dry on a table and then it was gone.. I think the :baby: swiped it and chucked it somewhere. Help! Who has one layin around.. already contacted Jetworks and waiting to hear back.

Rulemate 750's don't need switches and are super powerful and indestructable.

It will not help your top end...it'll just come out of the hole a lot quicker.

Burned up a piston...put a new one in...ran pretty good today, but still hard to start after a ride on the trailer or after riding it. Tore the carbs out today. coupler attaching the two carbs was loose, causing one of the flaps to delay opening...Ripping carbs apart in about an hour to get a...

They should be fine! Closest places to the ramps.

Nice work, Monkey! Now get your ski running!

Excellent stuff from Mr. RMac as always!

Disagree. The SXR Flywheel is VERY heavy.... a charging aluminum flywheel will make a significant difference in low end torque on an SXR (not as true on a SJ). I am pretty sure that 2004 and newer SXRs can run without a stator and can use a TL flywheel with stock electronics. (adding even...

Found some more issues today while test driving...the linkage between the carbs is loose...one of the couplers had the little allen bolt fall out holding it on the shaft. The flaps aren't always opening at the same time. Pulled carbs today for full carb inspection.

Seen what? The cyllinder come loose?

Helicoiled it up today...thanx Smurf! Just switched it to American threads...better choice in stainless hardware... Ski fired right up in less than 1 second!

May do that....just fire a hole through the whole thing??? Good idea. Anyone have pics of this?

Yep. They should be fine and are less than 1/2 mile from the ramps.

Gonna try the small bolt today.... we'll see what happens.

Xcellent vid...gets me stoked for wave season.

when it rains.... :no: Anyway...stripped a second hole on my FP mani... One is already timecerted...(worked awesome). Can't find the other time certs... can I screw a helicoil into it. (Found some in the garage). They are M8 x 1.25. It screwed right in....Can I just use the smaller bolt...