Search results

here's a pic of a inside the hull lead weight add-on i did on my 95 fx1. each lead weight is about 3 lbs, and i used the brown hi-temp gasket making silicone. i do remember "rayce inc" made a stainless mounting plate and it's own 5lb weight's, but the cost for that kit was something i did not...

what ??? gorilla

i got a complete 61x 46mm sbn wetjet carb setup that i'm putting in my fx1. well the 46mm sbn carb is off a 650 tigershark, but the holes on the bottom of the carb line up perfectly for the wetjet intake, no mod'ding the spacing !!! it has a 2.0 n/s, 120 205 jets, and a really dull looking...

i agree, you owners rock. you keep the scum user's from being able to play here unlike that other site !!! i should know, i was allmost got thrown off the banana boat a couple of times !!! thanks and keep getting it WET !!! gorilla

wow, those pic's reminds me of the old days on a 550 at half moon bay calif down by sfo !!! i might have to go to the next freeride just to see if my body can handle it again. i try not to mess with mother nature !!! she can hurt real bad !!! good luck gorilla

yes, that was like wearing about 100lbs of dead banana's, then when i got wet it was pretty much the end of play time. not to mention, it pissed off some the pro racers that were on the line trying to keep there mind on the holeshot !!! i did it for the ijsba, they kinda liked it, and they...

pic's from back in the days !!! that #4 ski is reagan cole's pjs womens 440 s/s. that #5 ski is tiny martinez's hole shot (chris fishcettis 1st Company) womens 440 s/s. and the guy holding tiny's ski is tom morton. he's is 1 of the coolest racer's out there !!! lot a heart !!! that group pic...

mike at northwet powersports just found another clean stock fx1 ride plate up in the top shelf he did not know he had. give him an email if you need 1 ??? gorilla

bob, mitchel at www.mm-marine.com is all over me about the fx1 pump conversion kit. can you p/m him or give him a email to start the info exchange. i don't want to qoute something that may be incorrect ??? thanks for the info on the green goo removal !!! i hope to get the s/n gas tank on...

ok, i found a s/n gas tank. whats the easiest + safeist way to remove the bracket's that's been glued to the hull for the battery box and gas tank hold down's ??? my guess is to use a wide screwdriver and hammer, but that might break the brackets apart and into piece's. any wisdom on this...

nice. those are over 17 years young too !!! even the "gorilla" !!! hahaha thanks for the good memory's. gorilla

i need to find a fx1 drive shaft 1st. the pump upgrade will be the my christmas gift to myself. gorilla

will a s/n - r/n gas tank fit in a fx1 ??? i'm not worry'd and the battery box location. gorilla

i worked, and the pipe did not break or come apart. i had to re-adjust the stock 44mm sbn carb, then one of the stock red spark plug caps came loose, but i was able to got to shore without a tow. overall results = better than the 61x stock pipe. now i need to get some ngk spark plug...

i'm hoping that it works, then i will put a riva cdi in. gorilla

here's what i got for a pipe for my fx1. a factory pipe 701 exhaust manifold, with a stock 650 kawasaki pipe. i had to use a spacer-hose for the pipe stinger cant wait to try it out !!! gorilla

more pics i fixed that double pic. it was a long day on sat, and more pics from sunday to come. gorilla

more pics gorilla

they posted tues through fridays results-novice and expert nice 89-85' weather. pro freestyle is going to killer !!! good luck gorilla

the time is here again !!! too bad the w/f's are not in the same spot like these pic's show !!! good luck to all the brave racers going this year. you may get a surprise on sunday yet ??? gorilla