Search results

Sanding, sanding an you guessed it more sanding, actually the part under the rub rails does not want to sand, I know how many coats of paint, primer silver base and filler are on there so I just got the 4 1/4 "side grinder out, I am vey skilled with the side grinder as I use it a lot to shape...

that is one sweet ski

I have about $35.00 in the boots and the seals, not bad considerng the stock stuff is no longer available and the Yamaha parts are too small for the holes in the ski and also very expensive. These things are smaller at the top than at the bottom so technically next time I could forsee putting...

The oil pump is variable rate , it pumps what it pumps depending on throttle position , if you are going to mess with the oiling system all this is unnecessary run oil injection or don't and run premix..

A follow up on the new cable bellows, they needed some kind of seal at the top, Mcmaster Carr part numbers 7291N44 and 7291N23 The 44'S come in packs of five, you will need them I messed up the first three trimming them , I just cut an X slot in the top with a razor knife and trimmed the...

nope, where would you run them from anyway, you would have to split the existing line, the fewer lines you have the fewer you have to break is the way I see it.

Mr Ho aint't gots no time to wait for no gaskets !

They used the same rotary valve plates on several different engines and at different times in production the oil fittings were moved to different locations, you can call Scooby Doo back and tell him not to show up, this one is solved.

Not all of us have acess to a gasket compant just down the street, sometimes you gotta do what you gotta do

The movable stainless steel sleeve section on the cable is longer on the part that attaches to the steering nozzle.

The book was made for stock skis, do what works for you in your situation. when I worked at the stealership on bikes , known leakers got gaskets backed up with sealer, you also used sealer to fix minor tears in gaskets such as clutch cover gaskets. no issues there, many a ski has been built sans...

Yeah but you have to use the whole tube up !

I need to contact him about getting a set of Thuinderjet graphics made.

Sorry someone PMed me late last night and said they would take it, he paid early this morning and that was that.

Engine, electrics, pump (driveshaft length is different, everything else the same ) , some of the exhaust hoses work also, if you cut up the hull cut out the section that has the engine mounts and pump tunnel in one piece someone might want that for some kind of jet jon or other contraption down...

I am going to be honest here, I wanted to scuff this thing and shoot it, it wasn't in the cards, I am not sure what happened on this paint but basically it is not stuck to the hull, maybe the Urethane softened the paint up under it, I can't be sure, what I am sure of is it's a fire sale now...

HEAD IS SOLD

Yes I will work on a stock 760

Dictatorships always do whatever they have to stay in power, peons be damned.

So apparently the threshold for submitting 1099 forms on income has been changed, it used to be $20,000 or 200 transaactions. now it's been dropped to $600, yes that was not a typo, if you make $600 selling goods or services online, Ebay, Etsy, Facebook or Craigslist your Government want a piec...