Search results

No dice on getting these braces apart , I heated, beat on, soaked , reheated , you name it I did it, however I am nothing if not persistent, I was able to get the left hand threaded ends loose, which is good because you won't find any left hand threaded 10 x 1.25 aluminum bungs, as a matter of...

Yeah I might know a lil bit about that , just maybe

I am just glad all the info isn't gone, it do look funny though.

Well thank God I moved the build here because the other site died a horrible senseless death apparently, at any rate this build has been stalled for quite some time while I located some X2 braces , thanks to someone over at PWCT I now have a set in my possession so now I can build a new brace...

I made two of these because at the time I was working at the Ski Nautique dealer doing paint, gelcoat and FRP repairs, mine was made from two engine stands I cut them loose at the bottom and rewelded them at 90 degrees, I cut off the tube at the top and welded it onto another slightly larger...

If I were to upgrade this I would probably add a small hydraulic jack to it with some kind of bracket welded onto the movable pieces , that way you wouldn't need the cherry picker or a hoist to move the movable tubing up and down to adjust the working height, I have an electric hoist on a...

Well there is always this one lmaorotf https://www.tapatalk.com/groups/bamafreeride/

I actually fabbed this up years ago but it has been sitting for years rusty and ugly, I need to make some new adaptors for it , but here is an adjustable PWC rotisserie, I just cleaned it up and painted it, it will never look like this again , once it's in use it gets paint splatters, gelcoat...

Depends on what pipe you are running and if the pipe mod has been done or not, stock 650 pipe on a 750 without the mod, no cap , with the pipe mod or with aftermarket exhaust cap it off or use the line for dual cooling.

That was actually a recall on the fist year X2 model, we had to replace the driveshaft holder - bearing and add flotation foam blocks to the hood , we used to call them U2's because they sank so much.

This got me thinking back a few years when people were putting 650SX exhausts on Superjets , none of them had added mounts either.

This is what I am thinking as well , somewhere around her I have several pieces of foam I pulled out of A 3D I could make a cradle out of as a backup plan.

You must be measuring in internet inches, my caliper says 2.125 total that includes the length of the coupling nut , at any rate a B pipe survives just fine without any mount there, these pipes are similar in so much as they have rubber couplers on both ends. Basically all I am trying to do is...

I have it all mocked up, It is just in mock -up stage though, I will need a better spacer then I have to wait till when my tig guy can weld the mount back on and tig up a couple of cracks in the pipe . The mock up engine is a nasty mess of a locked up 64x with a 650 cylinder but it works for...

Only if you are a Horndogg, sorry but I had to be said.

Now it says this page can't be reached, so one of two things has happened either they have royally screwed the website up again in which case it's going to take a while to fix or it's gone forever.

$600.00 is not real money, in this economy that's just grocery money.

Trailer came in under a VX 1100 with a toasted engine that someone dropped off for free , yes way too little trailer for that kind of weight, so I made it back into what it was built for, I welded all the crossmembers , put a plywood floor on it undercoated the bottom of the floor, stained the...

It looks like the IRS backed off the $600 misc income reporting for this tax year, it appears it caught everyone off guard and there was no way to get it implemented this tax year , don't worry though it will all be set up for next year and who know how long it stays, my guess is till Biden is...

...