Search results

Free blaster hull. Comes with seat and other misc parts including gas tank. Someone take this off my hands before I cut it in pieces.

I am currently running the thrust innovations FA adapter to be able to run a single OEM FA on my single carb conversion with a black jack carburetor. I basically don't like it anymore. The whole unit if very heavy. I have tried different types coupling hoses with no luck. I am considering...

Looking for a hose that is thicker than the normal blue 4 ply. I am running the Thrust Innovations Stock flame arrestor adapter. http://www.thrustinnovations.com/index.php?main_page=product_info&products_id=10&zenid=n2hudamh7lqbrj8fdkeg20h221 The hose that was supplied with the unit...

Since removing the stock choke plates when I installed a primer kit I have read that sometimes it is best to just leave the plates in, but its too late for that now. I have a 62T case 61x cylinder stock engine in a 93 SN Everything is stock including FA's and pipe with the exception of a...

I can see fitting atleast 1 ski under, and a beach tote on top. Would be great for Pismo http://www.sylvansport.com/play.html

Got my part just as described in a timely manner. Thanks!

Best turf jobs bluegtate and I have done yet.

de turfing. freakin really sucks on the fiberglass from the foothold install i did 2 years ago. :skull2::skull2::skull2::skull2::skull2::skull2::skull2::skull2: especially sucks inside those damn footholds.

Going to bullhead cit this weekend. where is a good place to launch and ride? going be pulling them out of the back of the truck, so somewhere we can pull up to the water would probably be better than on a launch ramp.

I have been talking to Art at jetworks about this, but I just thought I'd write a post to see what you all thought also. Bluegtate and I have practically identical setups with the exception that he has V Force II's reeds and I have V Force I's. He also has a limited chamber while I have a...

I have never seen one of these before. Looks like a modded blaster http://inlandempire.craigslist.org/boa/709053314.html

I'm going to order turf soon, possibly today, and need to know how wide the SJ tray is... They sell 25mm in large sheets for like $80, but also sell it in 39"x19" for only $20. I have extra 5mm and 8mm padding from previous projects to pad other areas like the rail caps, so I only need the...

A couple months ago I had a vibration that I finally chased down, it ended up being that I put the bendix washer on the wrong side of the bendix... I solved that, but now I have a different one. The noise, that for the purposes of this discussion I will call the "twang", sounds like it is...

What do you think would be a viable substitute for the "plastic welder" that blowsion sells with their footstrap insert kit? Do you think that JB weld would work? Seems like it would b/c a lot of people say use in when shortening handle poles, which is binding fiber glass to aluminum. Any other...

What carbs are these? They are taller than any other carb I have gotten my hands on. They measure 46mm on the bottom but are bored larger on top. Sudco sticker. They have lots of harley and motorcycle stuff on their website.

Don't shoot me here, but my neighboor has a 2004 RXT and needs to replace the ride plate b/c it cracked and let all the coolant run out of the system. He needs to know what can be used as a sealent for the ride plate. What is on there now is some thick black stuff that is very hard. It took a...

Gallery link not working on homepage

I sold Ben Swanson a 6 bolt Square nose Pro Tec ride plate. He received it and claimed it was bent and cracked upon arrival. He requested that I refund him half the money back if after his attempt to repair the ride plate was unsuccessful. I don't know about you all, but I have never seen a...

I like. Very nice.

Just wanted to say thank you to everybody that has purchased parts off me through this forum. There are more parts to come so keep your eyes open for them.