Search results

The large Seadoo graphics are here and I said earlier they have to be respaced to fit, that means cutting out each individual letter and placing it on the ski in the right spot , even at that it wasn't going to cover the magenta correctly, what to do , what to do ? Then I pulled one out of the...

All back together and looking purdy , I also put on new grips and hit the black handlebar parts with protectant to get them black again , I used spray paint to install the grips it works really well. Labor was in the hog killing yesterday so zero on that , the grips came from Temu and are...

Sure no problem : Your color code may vary so stick with me till the end Brown to Brown :1.5 -2.3 ohms Brown to Black Yellow :0.7 -1.3 ohms In your schematic the two Brown lighting coil wires will be green instead of brown , Your other wires will be red and green for the charge coil ...

Must resist

The majority of the members here appreciate your efforts , I realize it's a lonely and thankless job but I for one appreciate what you do here, others do also whether they will speak up or not.

While I had the cover off, the beeper was dead , most likely because of the giant dirt dobber nest inside of it , also the switch was toast , I had a set of handlebars out of a 4TEC laying around with the beeper still on it , all Seadoos use the same beeper assy. from 88 up to now , I cut the...

Today we are repairing the handlebar cover , this one is still fairly nice and hasn't yet reached the playdough stage so I am just respraying it purple using SEM vinyl dye. You don't have to follow my instruction at all , this is how I do it, you can follow SEM's instructions and buy everything...

My activity level is way up after the hip replacement and so far I have lost 15 lbs this year , I am looking to lose another 25 -30 lbs and it looks like it may well be withing my reach .

The STX is back up and running , I just have to tidy up the wiring and bolt the electrical box back in , this one gave me a run for my money or as Arnold would say ( they tried to kill me but I killz dem ) . It was an absolute electrical nightmare, bad terminals in the Furukawa connectors , bad...

The farce is strong with these ones ! I like to think of myself as a fairly helpful guy, I have worked on peoples skis at freerides and got them going no charge ,I have given away parts , you name it , over the years I have learned that some people you just can't help, they won't let you ...

The guy also had a 650SX sitting on a trailer, I talked to him about it and peeked under the hood , someone had removed all the cylinder head studs and replaced them with bolts, the bolts looked huge so no telling what went on there , also it had Sea couch flame arrestor top pointing straight up...

I retrieved the seat from the shop , it was quite dirty from sitting on the shelf but some LA Awesome cleaner perked it right up , that is a brand new NOS seat that was still in the plastic and it has been waiting for a machine to go on for some years now , there is still some mildew or...

So today I did the Elmore county small town tour , I started in Greenville at 8:30 this morning, unloaded the 4tEC off the trailer onto a stand , then I went to Wetumpks and dropped off parts and picked up money for said parts , then to Tallassee to drop off the trailer and pay the guy for the...

We are now at $575.63 and about six hours of time spent on this machine , I do still have to buy a battery so another $45.00 to $50.00 will be added on there at some point , also there will be some time buffing the top and recovering the fore seat , there are a few very small gelcoat spots to...

The DESS key on this was past being shot , it actually crumbled when I put it on the post and fell off what was left of the cord , amazingly it still worked as long as you held it on the post. I was digging around looking for parts at the lake and I came across a ski with a dead engine that I...

The jet pump is glued back in , driveshaft is all hooked up and secured , hoses are back on , PTO cover is on and the flame arrestor is back on, mechanically it is mostly done., pending the results of the water test , which may be tomorrow. I have a brand new seat at the other shop I will...

Been there done that with a 1200 before , what I ended up finding was bad reeds, of course I found that after doing head gaskets , crankshaft seals ,pulling carbs multiple times, swapping CDI. coils and everything else I could think of, reeds looked good but leaked so badly you could feel the...

So the impeller is done, only the front edges needed attention , nothing a few passes with the angle grinder can't fix , the jet pump oil what there still was of it was nasty and chunky and about 100 hrs overdue for an oil change , I cleaned it out with Berryman B12 carb cleaner and reassembled...

Pine -sol, purple stuff and Castrol Super clean all work really well, I haven't tried it but LA Awesome cleaner undiluted would probably work well also. Replaced the oil lines, I use Tygon weedeater fuel line for oil lines, they are a little thicker on the wall size of the tubing , I resuse the...

The best I can describe it is it's like powersliding a dirt bike , if you ever watched flattrack motorcycle videos you would understand , but on the water