Search results

Moved steering forward 6". . Filled bond line with microballoons. Added more glass to sides for strength.

Shapped and made tubbies out ridgid foam. Glued on and glassed in. Extended tray forward into motor cavity 2 1/2". Molded pocket for front foot.

Made a mold of Stanton's Footrocket footholds. Then put a layer of carbon over the top. Then I cut out a rectangle where I expect it to mount and poured resin and microballoons into the side rail to make it solid. Then glassed that back in. This way I can move the footholds around after...

Filled rear tray up tight with styrene foam and glassed in. Side rails have 1/2 foam. first layer of glass connects from wall to inside wall to inside wall.

Cut off the hood almost flush with center. New breather inside pole.

I cut 3 1/2 inches off the back and then re attached the end pieces. I also lowered the deck to the top of the pump.

I cut a bunch of slices and pulled the nose up with wire and wedges. Then I pulled the sides back together by twisting up wire. Then re glassed it back togehter.

My buddy gave me a complete stock SN hull, missing a carb, but had an ac racing handle pole and a top loader. Motor was frozen, so I decided to tear it down. I first rockered the nose, and cut 3 1/2 off the back of the ski. I shaped and made tubbies. Put a front foothold in through the...

If your engine is ported and all you should run the 10/16, 9/15 for stock set ups.

x2, very nice, Im getting the paint booth ready for you!

I wrapped the corner first, then cut out a couple of the diamonds, and brought the fingers back together.

Your Mail box is full! I want to ship you my flywheel and nozzel. Please contact me, Thanks

Insert the image to your post then right click the image. Copy and paste it right next to it. It will be large. Then delete the little one. I have micro balloons if you need them when you are ready.

Looking good bro!

Did you get this thing running yet? I'd better not finish before you!

Kchighrider, sorry took so long, know you been asking. The L bracket to the right from ACE is what I started with. I took the adjustment screw off and old brake handle and threaded it though this L bracket, then found a nut to fit it on the back of the bracket to keep it tight. The bracket...

Last christmas I bought a couple skis for $500 a piece, people need money bad now and couches are a dime a dozzen. The yellow ski need some minor electrical work, and the black ski I painted and turfed, for practice. I got them all cherried and sold them in the heat of summer for $2500. Cash...

Ya, I'd like to help, You may have to ask if though, But here's what I know quick. I routed the cable through tube in the lower left corner the tube with the black cap on it. I put an L bracket approx 1" by 1" on the rear pump bolt, then used a threaded cable end like off a brake handle the...

No brotha, Hurt my neck pritty good at the free ride. not even trying a flip, and i was planning to come back out the next day, but ended up going to get my neck checked out. pulled a muscle was laid up for couple days, missed work, really bad pain, had to sleep up right in a chair, was hard...

Count me in!