Search results

Looking for a cheap kawi 650 pump and nozzle, no impeller or driveshaft. Thanks

Did you just grind the pump tunnel to fit or graft in a sj pump tunnel? SJ intake grate?

If anyone has a crusty 650 pump laying around let me know. I've been storing my friends x2 for the last 15years that hasn't been on the water since the 90's but I probably shouldn't rob the pump out of it..

Skat makes a 19/24 and solas has a 19/25

Because he’s 4’3” and 70lbs and a smaller ski is easier for him to man handle. The pump and prop are good.

What’s considered a low pitch for the stock pump? If I remember someone who would know said it was too low when I built it.

Looking for some advice on impeller selection for the stock pump. If anyone remembers my build thread from 2years ago I built an fx1 for my son. The hull was in the process of a 144 swap when I got it, but against my better judgment I decided to put the stock pump back in it since I didn’t...

Still interested in trading fx hull/pump/pole for square hull/pump/pole.... Can be a total beater and dont need a title..

I feel like it isn’t just forum participation that’s dropped but rider participation is way down also, at least around here. When I started in ‘05 there was quite a bit more people riding/posting but I feel like there was a huge boom around ‘07. Back then you could get a cheap superjet and...

Built an fx1 for my son and he would like to try a superjet and I would like a ski I can actually get my hands in the engine compartment. Super tight with stock pipe.. Fully reinforced with 1208 and carbon, external carbon nose piece, tom21? Front sponsons with extra chine removed, wide tray...

When you trim the wires back tug on the bare wire with some needle nose to make sure they arnt broken off further back in the insulation.

Believe fish ran a square nose with seadoo graphics

Ill give it a try..

Stock motor and pipe so I don’t think that could be the case. In comparison to mine it’s way down on power and the steering setup is identical aside from the different fx nozzle. But I know what you mean..usually very easy to direct that much fast moving water…seems like it shouldn’t be. at the...

I did.

He’s gonna be mad I uploaded this..he told me not to film since he was just clearing out his motor after sinking first thing when we got there. Then he started having electrical problems..he’s never had to negotiate that much whitewater before..was actually some solid set waves..but he did good...

So my sons fx1 has a weird issue. The bars get harder to turn the more gas you give it. For a 70lb kid it isn’t ideal.. has brand new steering cable that’s free as can be..doesn’t rub on anything fresh bearings in steering system no excessive slop in nozzle..it’s modded for quick steer and I...

Nope.. three ripped all the way the third held mostly together...probably rode like that for awhile until I felt it.. These were old ones..should have probably put fresh ones in but I had a bunch I wanted to use up..

I used to run monkey grips mounts. Think the same set lasted me 6 or 7 years..only downside is more vibration...tried to run oem mounts on my new ski and I broke 3 at once in small waves..no upside down landings or hitting bottom, just a few side landings on reentries and I’m running engine...

https://www.corbettreport.com/the-weird-darpa-facebook-coincidence-you-never-heard-about/