Search results

Cool, I couldn't tell if that was a White seal or what haha

Awesome, that makes total sense! You are doing this with the pump seal installed?

I got ya, I can use the seal as a guide. But this looks like it’s gonna be pretty thin in areas, and I’m not sure if the pump will line up perfectly with the area I can grind on the shoe. I will need to recheck that everything will align correctly I guess

Any ideas on how to do it accurately? Or is it not that sensitive?

Yesterday was fun, lots of grinding and sanding to get this pump shoe into place. I test fit the pump with and without the pump seal. With the pump seal installed, I have half moons visible through the pump mounting holes. This should give a nice squish of the pump seal against the shoe. I...

bump, ski is OBO as always

I was able to get my installed today, it was difficult but not terrible! I filled the front of the tubbie with thickened epoxy to fill the area it needed to be trimmed. I used some of the extra foam from shaping the rails to hold down the rear of the tubbie. Worked perfect!

Seriously, they are the best bikes EVER. If you don't know who Scott Summers is, look him up! I added a kickstart to my 650L which is awesome cause I can look cool starting my bike at the gas station, but then use the magic button when nobody is looking haha

still available

Damn, riding the king daddy! XR's for life!!!! My L is as modded as it can get, I cant imagine riding the R

For sale is a nice Factory Pipe for a Kawasaki 750. No stripped holes, all threads are good. All 3 screws turn perfectly and I even had a new set of screws so I installed them on this headpipe. Comes with bracket and hardware. $1400 SHIPPED

Man, good times :D Saturday got rowdy

If you want to see 30 minutes of people not riding jet skis, watch this video... You might even get to meet Paul Lehr at the end :)

That movie is insane haha

Nooooooooooo! Its so perfect, now I have to fill it in and re cut it :( I was proud of how good it came out haha I guess I should have checked sooner P.S. Can somebody send me some pictures of where to drill for the trim tube?? In the engine bay and in the pump area... Ive never installed one...

@mikesx I cannot find any schedule 80 locally... Could you sell me a couple pieces?

Pump shoe is bottoming out at the top of the tunnel, you can see a chip in it in the picture... chipped right out. I will need to open it up a bit probably to get the correct alignment. Thats a good idea for the ride plate mount, but that would probably still be in the way. That block in the...

First major problem, hopefully easy to solve… the ride plate mount is in the way of the steering cable holder. Anybody have any suggestions? also the Worx pump shoe is bottoming out on the tunnel before making contact with the screw surface…

All parts are OBO, shipping with the speed of...

Got a lot of sanding done today, I feel like this thread should just be called “my life, sanding” but the rails look pretty dang straight! Next up is installing the tubbies… getting closer to being finished with all this tedious work every day. I can’t wait to start installing stuff and be done...