Search results

Hi guys, looking at a carbon visual Edge FS are these still strong enough to take a bit of stick in the surf compared with a FR Cheers

Not sure is this is a common problem... When I bought my ski (Rickter XFS DASA 1200) it had the original OEM cables thet were years old and it didn't crank very well. Cut cabes open and were a horrible rusty colour. Replaced the cables with a Marine flex 16mm2 tinned cable, cranked perfectly...

Why don’t they do a 94.5mm pistons for the big motors. Seems crazy to me as sleeeves cost so much by the time you have them fitted ported and bored. Surely half a mm out would clean it up and give you a bit more life out of your sleeves.

Hi Guys, Have a 2015 new shape XFS comp with dasa 1200 and RRP pipe. Had a max 155 75mm 14 vane with a 9/15 skat thin blade pitched to a 13/19. Worked really well, not huge bottom but pulls really hard in the mid range on combos. Got a Maxx 160 18 vane 83mm hub with a 12/19 thin balde, long...

Hi Guys, My mates pfp chamber has cracked and we have been running it wet by just blanking the water ports on the chamber and fitting a water injection to the manifold. Would there be much gain in power if we cut the chamber open and remover the inner chamber then welded back up?

My mates running an et 1100 and pfp in a 2014 XFS. He wants to run a full size tank and B pipe in the surf for the winter. Has anyone ran the b pipe with an 1100 and how did it perform? Cheers

Hi Guys Has anyone had a new type pfp chamber crack?

Hi Guys, Have a new shape xfs comp and ninja foot holds. Tried all different boots over the years (Size UK 11) best were the original jetpilot race boots that they haven't made for years. Use to be able to wedge my feet right into the hold and stay locked all the time but now they have had it...

Hi, I have a 2015 XFS Comp, Dasa 1200, RRP pipe, 155 max pump, RRP trim with RRP flow guard. If im doing multiple flips it just pulls and pulls no issues. If I do say a 360 aerial spin when I land it seems like it loads up and needs a few blips to clear so stops me being able to do another...

Hi, Does anyone know where I can get a graphics kit for an old shape XFS? I found an old post but they don't do them any more. Thanks

I have the RRP exhaust system on my ski. Realising how I want more mid now I'm doing multiple flips etc. Has anyone removed the sleeve? Didn't realise it was in there till I measured up to see the difference and there is a ring round it at 73mm that's PFP size...

Hi Guys, Been looking at TL for a while now. I only ride salt so the ATP inside a OEM box seems more suited to me. I know you can get the RRP enclosure or fab up a box for the MSD but I just want it as hassle free as I can get and for ease of setup and cost the ATP is def up there. Not worried...

I'm looking at getting MSD TL For my dasa 1100, RRP pipe, 160 Maxx pump in an 16 XFS. I ride 95% of the time in salt water. Been discussing it with a few people and there seems to be mixed views on the best way to built it. Cost isn't an issue so was looking at complete new kit and an RRP...

Hi, I saw a post on here that a waveblaster 2 drive shaft can be modded to fit a Maxx setback pump, and sounded like you only need to machine the bearing end. Does anyone have a drive shaft they can measure for me please so I can be sure. I know there 27" long but need some other measurements...

Anyone know any more info on these? Wondering if they have the comp large pump tunnel, de-foamed rear tray etc and a price. Cheers

Hi, I have my Dasa 1100 10mm apart and need to find out the wear limits for pistons and rings. Is there such thing as a Dasa manual or does anyone know what the wear limits are? Thanks

Hi Guys, Just installing my RRP ninja pipe on a Dasa 1100. What is the best jet sizes to go with. The manual says fit a 120 before the filter then 110 in the spray bar and doesn't mention a restrictor of flow control valve on the water box. Cheers

Hi Guys, Have any of you had much luck fitting a 155 OEM or Maxis pump to the older rickters? I have a 2011 Full carbon XFS Cheers

Hi Guys, Just ordered a DASA 1100 10mm stroker package with DASA 48 carbs, manifold and v force 2 reeds. It's going in a carbon XFS with H2O 148 pump, b pipe and msd enhancer to start with then will get a rrp or pfp later on. Has anyone got some rough carb settings and prop pitch please...

Hi Guys, Looking to by a dasa 1000 or 1100 10mm stroker. Currently running a TPE 964 with b pipe 49 full specs, msd enhancer and 148 h2o pump with 14/18 prop in a carbon XFS. Can't decide between the 1000 or 1100 ATM. And also debating changing to the RRP pipe with a msd enhancer when I...