Search results

Evening guys, does a 155 pump fit in the old Rickter FR2 evo 1 hull? Cheers

Been looking at the Zeel for a 62t. How are people finding these are performing vs the msd enhancer now they have been out a few years. Cheers

Morning, are X Scream still trading? Can you still get parts for SS900? Cheers

Hi, glassing a new battery tray into my tiger craft sv1. Are these hulls made using epoxy resin? Cheers

Hi Guys, Could anyone tell me the best way to run the water pipes on this please? Cheers

Hi Guys, Building a 780 85.5mm 61x cylinder 62t cases Fully ported and epoxied with 44 carbs and rrp ninja pipe. should I run a reed spacer plate? Seems like all the work to add epoxy to the inlet to reduce the crankcase volume would be lost. Be interested to hear your thoughts. Cheers

Hi Guys, Anyone know where I can find sleeves for a dasa 1200 7 port 16mm stroker Cheers

Saw a post on FB where someone was talking about a mod you can do to mukuni kidney plates that stops carbs dribbling at low revs. Anyone got any info on this? My dasa 48s always dribble on my 1200 on idle Cheers

Hi Guys, Just repairing a Skat mag that the housing had cracked on. What’s best thing to put it together with? I was thinking loctite retaining compound that will hopefully keep the salt out for a bit. Cheers

Only just seen the Zeel ignition that’s a direct replacement for super jet 62t and 61x cdi like the MSD Enhancer, but fully programmable. Who’s running it, and how good is it? Cheers

Hi Guy, How many of you now lithium batteries with an OEM yamaha charging system? Want to run one with my DASA 1200 and Yamaha stock electrics. In the early days read about them catching fire etc... Is this safe to use now as they as so bloody light.

Hi Guys, What length drive shaft do you need for a revolver pro series when running a set back Maxx pump? Thanks

Hi, I have a xfs comp with a dasa 1200 and a 160 Maxx pump. looking to get a new trim system. Currently running the rrp trim with flow guard. The new LSP one is 5deg upswept, pitch offer both straight or upswept. Who’s running what? I’m guessing it will feel a bit nose high with the upswept...

Hi Guys, Just got this motor of a mate and don’t know anything about it. Anyone shed any light on it? Bore is 85.5 mm pistons say 65u 1.50 on them looks like the piston has been hitting the dome on the exhaust port side. Domes only measure 84.5mm. All feels very sloppy so guessing it being...

Just had the battery go in my XFS comp 1200 the lead acid battery I run is 6.2kg and bloody heavy are lithium batteries safe? See a lot of people using only thing is I don’t have TL so not sure if the ski charging system can damage them? Thanks

Got a set of 48 riva power bombs. they have different low speed screws to my dasa 48’s. Much chunkier and AM looking. If you wind them right it they Stop before they bottom out. If I take the spring and washer if they bottom out normally. As they are, they both end up about 3/4 of a turn out...

A friend has a Tigercraft V2x and wants to change it back to have a pole. Long shot but anyone have a hood? cheers

Hi Guy’s My SS900 has just been bored out to 91mm Asked for the PV clearance to be checked when it was done Just built the motor up and measure it at 0.1mm/4 thou That seems way to close to me everywhere is shut now and want to get motor built up now. Anyone know what it should be and I’ll...

Hi Guys, Just building a 62t 760 for a friend. Cases have been heavily ported including the inlet tracks being filled too. He gave a me a set of Vforce 3 reeds to fit for him. If I don’t run a reed spacer they hit the epoxy. Run a spacer and just clear. Never seen anyone run these with a reed...

Anyone running a 148 maxx setback with a ported 701? Just wonder prop pitch is going to be close It’s going in a FR2 evo. cheers Rob