Search results

So I need to rebuild my bearing housing.... http://www.x-h2o.com/threads/21652 What parts/ tools do I need and how do I do it? Do I need a press? Should I just buy a full bearing housing deal from AJS? http://www.atlanticjetsports.com/bearing_housing.htm

Ok so I switched from a limited chamber to a blaster mod. While my ski was down I pulled the pump to check the impeller (13/16 cut back skat swirl) for wear and swap back to the stock pump cone. Iget it back together and get the ski in the water and it rides fine. Then the pump starts breaking...

http://cgi.ebay.com/ebaymotors/KAWASAKI-550-JETSKI-JET-SKI-STAND-UP-MODDED_W0QQitemZ250110605878QQihZ015QQcategoryZ31265QQrdZ1QQcmdZViewItem Looks like a b-pipe but with 2 bolts. It's a factory pipe, I have just never seen 1 b4.

What jets/pop off should I be running in dual 46's? motor: -83mm Ported 61x ports raised a bit and the sleeve on the intake side is notched -ported 62t cases -b-pipe limited -rad valves -stock timing (might do a slight static advance) -low compression like 155lbs on a decent gauge -prok's...

I was out on a site a few months ago where they were doing some soil testing. Well the guys out there had white plastic gas containers used for holding water that were red on the bottom. I'm talkin snow white and they were only red on the very bottom. It only hit me a few days ago that you could...

My bendix engages then just spins. I have been trying to start my ski now that I have spark and now the bendix won't stay hooked up. The battery is fine it was just charged and I also tried jumping it same ********. The conections are good and I tried jumping the solenoid and still the not more...

I have been in the ocean twice this year with my sj and both times my ski has lasted about 1/4 tank and then something in the ebox takes a ****. First it was the coil now its the CDI (I think). When I open my ebox it is always clean and dry. All the voltages on the stator check out as per the...

I just bought a xxl fly freeride helmet from blowsion and it doesn't even come close to fitting. My nose sticks out past the chin gaurd. Who makes helmets with huge sizing?

I can sign in and view threads but thats where it stops I have to use firefox to post and IE to view attachments. It used to not even let me get past the main page, a vbulliten error would come up. Is there some setting I can change? thanx

I just picked up a set of rad valves on ebay. Am I going to have to rejet when I put them in? How do I know if the reeds need to be replaced? Any other feedback or tips? Thanx, Ryan

I picked up a 62t cylinder from a 760 raider. I want to put together a topend for my sj. My cases (ported 62t) are already cut for the bigger sleeves. What would you guys recomend I do?? I know its a broad question but I really have no directionas what I want to do.

Adet16v bought this motor on ebay last week and it arrived at his house. Someone else has the motor listed for sale now. The guy told me he bought the motor last week and its the same motor. The seller also emailed adet claiming he was scammed by the original seller of the wet jet motor...

I have the stock ignition in my sj with porting and a b pipe. I was doing some short WOT runs and the ski was pulling really hard then it fealt like the rev limiter kicked in and I almost lost it. My ski pounds off the rev limiter when its out of the water but never when its hooked up. My...

Has anyone used their stock replacement coils for the 701&650 yamaha's/750 kawis??? I need a new coil and the msd's are $85 vs. oem which is more. Msd's site says it has improved spark blah blah blah, but if its gonna take a ******** on me I don't want anything to do with it. Thanx Ryan

How do you tow a superjet with no one on it and not sink it? Tried towing mine in behind a boat this weekend and it just went down so I had to ride on it while getting towed. thanx

Does anyone have any reviews on the XFT pump shoe? Do you have to grind them like the blowsion ones? I just destroyed mine now I need a replacement.

I sold him a bendix on ebay from my 650sx. The bendix worked flawlessly when it was in the ski it was just a little ugly like all of them are once they are used, but none the less it worked perfect. The description read "working bendix from a 650sx" or something close to that. He sends me a...

I'm running a single 44 on my SJ 145h 120l 2.3 & 95 g spring. It was running lean when I had a 115g in I swapped in the 95g now it's running much better. It loads up a little just off idle and still has some very minor hesitation a little higher up. I need to order some higher pilot jets. My...

There was a post about steering cable ends that mc master sells. I can't find it anywhere. Can some one help me out???

I did a search on pwc2day and came up short. Every pwc battery I have ever owned Has gotten low on acid. Why is this?? I know the batteries are not leaking. Is the acid/water evaporating??? Or is the water being converted to H2 & O2? I have always heard that adding distilled water is what to...