Search results

Here are a few pics of how I put a rear W/B in my 1100 blaster, I think that the expansion pipe outlet is in a similar spot as the 1100 exhaust.

Damn Tim, you know not to stop at a yellow light in Texas. Sorry we won't get to see you this time, Take care of yourself.

please let me know how that works. I went ahead and ordered one of the aluminum 155 pump shoes from Jeff at waterdawg since I was getting a new razor hoods from him :bigok:. But fist I'm going to try a few different props I have before I make the jump to the 155.

Here are a few pictures a guy sent me of his 155 he put in a 1200 blaster. Demon, what kind of HP will the 144 handle? I'm trying to figure out what prop to start with on mine, any suggestions?

1- Lg shirt & an XL hoodie if they are made

I have seen pictures (I may have one saved on my other computer, if I do I will post it later). I am thinking about doing it to my 1100 b1 after I do some testing w/ the stock pump. Luke

Well the swap is done. I took it to the lake to have it run for a few seconds and then die over and over, it wasn't until I got home and removed the gas cap until I figured out why. So I turned the breather valve the right way and I'll have a chance to go test it sometime this week or weekend.

Are there any other steering cables that will work on a B1? (Raider, B2, SJ, etc...) I'm wanting something a stronger than stock for the 1100 B1 I'm building. Thanks, Luke

WB installed.

finally did a little more work to it. I chopped about 10" out of the stock 1100 waterbox and welded (don't laugh, every time we pressure tested it we found a few pin-holes so we went with the more is better approach) it up so it would fit in the rear. I also went with the 1100 outlet inside the...

Pulled the motor back out & did some more glass work on the mounts & cut the bulkhead for the exhaust. Does anyone know of a place that sells a rear exit exhaust outlet? for like a SJ or SXR I could use on this. Luke

Do you have any pictures of the setup under the battery?

Also what prop/pump where you using?

Hey Danger, Did you use the gp760 waterbox? If so how did you reduce the size of the exhaust tube to the waterbox? Or what was your setup. Luke

Here are some more pics.

I have been slowly working on this project over the last few weeks. It is a compilation of all free parts thus far. The motor is in to just make sure everything lines up. Let me know what yall think so far.

Here is a pic of what I'm filling in. What do yall think?

I guess I used the wrong term with filler. I am in the process of putting new motor mounts in my B1 for an 1100 and am building up the base and glassing in the plates to mount the motor mounts to. So I'm wanting something to make it stronger than just resin.

I have some extra small pieces of carbon & kevlar that I was thinking about cutting up and using as filler in the resin. Would this be better (stronger) than using chopped mat or is there any drawbacks to it? Thanks, Luke

I may be down for one of the SN w/ RN pole mounting, just a couple of questions. Is it stock height or lowered? Do the hood hooks line up now? Thanks, Luke