Search results

I was not considering using the fx-1 hardware for my rn. I was just comparing the two and their turning ability. What improvement does an am turn plate give? Smoother, quicker? If I buy one of these will I need an aftermarket steering cable or can I use the stocker? Does anyone know if a...

Which steering systems have you tried? Have you tried the am system that the other guy used? Does the 2.5 inch system you recommended do the same thing as shortening the pole 2.5 inches (assuming that the stock steering is 5 inches)? If I bought this setup, would I need to get a...

Thanks for the info. Does the am steering plate have any other advantages? I currently have my steering mounted in the center hole of the stock steering plate. Would moving it to the outer most hole give me even more throw? What about getting a different nozzel? Are there any possiblites...

I relocated the steering hookup on the jet nozzle already. I moved it about 3/4 inch to the inside. I didn't really notice a difference. What is it supposed to do? I've been switching back and forth between my rn superjet and my fx-1. The fx-1 turns so much quicker with no mods. Can I...

Do those nike water shoes come in any other colors than neon green? Can you feel the ski well with the nikes? I rode barefoot (forgot my water shoes) and feeling all the pressure points was quite helpful.

hey scorn. Do you just take out the foam for air on the top and bottom or do you also take out the foam that seals onto your face?

fixed the carb problem. I just had to increase the low speed adjusters a bit more than 1/4 turn and all is well now. What is the technique for carving from full throttle and speed like the racers do? It seems a bit dangerous to me.

Is everyone using goggles? I got really sick of the punch in the face water that I tried some saftey googles. They worked pretty good, but easily filled with water. Has anyone found a better way to avoid the open eye blues? How about shoes? I've heard wrestling shoes are good. Any...

do i need to use a lot of force to make the socket "pop" out?

There is a spring loaded collar on the turn plate up front too? How does it slide? Thanks guys.

I just finishe moving the nozzel attachment closer for more responsive steering. I cannot figure out how to center the bars. When I have the bars straight the nozzel is turne a bit to the right. I notice an a juster near the bars. I loosene it but am not sure how to a just it. Please...

Anyone know what high speed screw out 1 2 means? Does that mean 1 to 2 turns out? In the factory jet pdf it looks like the 1 is in normal black and the 2 is in grey (maybe they meant to delete the 2)

I have a 01 superjet rn. It has the factory b pipe, ms? ignition changer, flame arrestors, carbon reefs. It has a lull at about 2/10 throttle. It then comes back with a surge at 3/10. What changes to make with the carb? I'm in Il (chicago area). Temps have been about 80 to 85...

Would the white stay white or does it get dirty and uncleanable quickly?

It seems like a lot of you on here have footholds. Are they a must have? I just started riding this year. Should I wait for winter to install them or are they needed right away?

that looks pretty cool, but it looks like it has to mount up to my current roller. I only have two rollers so I need something like that to be mounted to the trailer on two places (for 3 skis total).

I have a two place aluminum jet ski trailer. It can hold two giant sit downs no problem. I would like keep one bay open for our seadoo sitdown, but also get my two standups (superjet and fx1) on it. I've seen a guy have some sort of bolt system to go thru the hole on the front of the skis...

My rn superjet seems to have a dip in the power at about 2 out of 10 on the throttle scale. It continues until about 3 then surges. It makes it a bit difficult to ride the edge of loosing hook up and powering through the carve. Has anyone else had this happen? My fx-1 is smooth throughout...

Ok thanks. Do you remember which parts had to be glassed? I'm thinking the inserts to attach the pump (4)? Oh and possibly the pump shoe or maybe that can be epoxied in. I can't wait to finish this mod.

Hey harcore. what am I missing to complete the 650 conversion? I have x2 nozzel 650 pump with impellor zxi 900 kawi shaft i have no bearings yet. special has them or you sent him parts to change over? necesary to buy some glass stuff? i have no experience with glass work? What is...