Search results

Loving the progress Wax!! But, The only thing that come to mind for a change (after messing with "B"pipes for 26 years) would be to re-locate or eliminate the high speed water injection point. Having it on the bottom was a challenge to access and tune. Especially on the FX-1. In the end, I just...

The "business card" or really close space between the trailing edge of the impeller and the stator veins worked great in the 440 style and stock FX-1 122mm pumps. That significantly reduced cavitation. especially in the surf behind a bigger motor. The gap in that 155mm might actually help to...

The black stuff is normally from the aluminum cap wear on the top of the sparkplug. Those style plug caps are good for lawnmowers. You should probably be running resistor plugs with solid caps. NGK BR8HS solid (6715). Spray some cleaner in the plug boots and dry them out. Check out the...

Last chance...Price reduction with added stuff you need, see edited listing.

I run 20% VP113 and saw this sticker on the 5gal pail. My first thought was is this fuel really that corrosive to metals? Then again are the VP folks referring to regular carburetors with float bowls? like the good ole Holley 4bbl? In any event, if it's drained, it can't corrode. I haven't had...

It's still available...

You can cheat by removing the pressed in plug on the end of the pump boss, where the factory presses in the straight SS adapter for cooling. Drill to size then use a insert X male elbow to feed the new line. That plug, (looks like a mini freeze out plug) will eventually blow out anyway and you...

Thank you BK!!

Not really. I'd rather sell it as a complete new kit.

19.5hp?

no takers?

20hp?

bump

More power. The Newer Power Factor dry pipe comes with it on the end also. It's where the metered water is mixed into the exhaust flow.

Bump...

Bump...

Don't use double sided tape unless it's for a display ski. Glass/bond them on properly or they will fall off and create a big surprise while riding

Those on the FX above look to be installed backwards.

Wow! this sponson thread really took off! In search of the perfect tubbie... Anyway, since all the aftermarket sponsons are designed NOT TO FIT the FX-1, you are kinda forced to make your own. The FX I originally bought to hack up and use for plugs came with Blowsion Tubbies (originally for the...

Divinylcell foam sands nice and uniform, (4-5oz). Pour foam ends up with hard and soft areas that will make the sculpting job a nightmare. Divinylcell also doesn't absorb water like pour foam does.