Search results

Good info! So kevbo, you are saying that it's not really done on purpose, just where the jetting ends as a result of tuning a larger engine? The reason I am curious about a difference in jetting is because of my current carbs, Blackjacked SXR 40 I bodies. Art does not "Blackjack" (annular...

Seems I recall reading that the first one was going to be send out of the states???? I never heard whether it was actually delivered or not.

In the "Affordable Power" thread, Waxhead mentioned reverse jetting, I've seen it mentioned here before as well. I'd like to hear more on the subject. What advantage does this have? Can anyone elaborate on how to switch over a carb from standard to revese? If you are running 80 pilot...

I think he canceled the whole thing. Too bad, it looked promising. There were some pictures of one comparing it to the Matrix side-by-side. Wish I could get my hands on those molds.

I believe these are what I used: Clunk $3.99ea Fitting $4.99ea Might want to call on those fittings, web site does not indicate it's 1/4", but pretty sure it is.

I'll look around, they were cheap, about $7-8 IIRC, plus the clunk in the tank. I did find out that a Ryobi weed eater gas cap fits those tanks and actually has a one way valve built into the cap, so you don't need to drill it out and install another fitting and separate one way, so even...

You can always do this until you get a tank figured out. It's ghetto, but cheap. I had the tank and added about $25 worth of hardware.

Xft???

Yep, Monte moved out, we are moving in. Won't be fully moved in until our other house is ready to sell.

Yep, vent line. What I found on that cap is that it has a one way valve built in. I didn't actually need to drill it out and add a vent line with one way valve. That tank will get replaced eventually when I get around to it, but it works, and was under $20 with fittings and cap. I kicked...

I think he's saying when it's time for a rebuild, you may not need to bore and hone because of the Nikasil. So Nikasil it once and rebuild it many times, giving a potential cost savings each time. But yes, when it's time to recoat, it's time to bore and hone then recoat from what I know about...

When I modified my hull, the back was cut off and then blocked off with rigid foam with a layer of duct tape over it (just duct taped the foam to the back of the hull). Then glass from the inside out. When you pull the foam off, it will leave a nice smooth surface that needs minor sanding and a...

I've only heard bad things about it in for a ski. I'd bet it would be a good bulking tool for molds though. Don't the LWDE skis have some sort of core?

#337 Viton is what I run.

Me and some NW guys are still kicking around the idea of coming down there as well. I want to mooch rides on as many customs as I can.

He's in NV, no Powerball there cause the state doesn't want to compete with organized crime.

Also, the word Jap can be offensive to some and often used on these forums: "Jap is an English abbreviation of the word "Japanese." Today it is generally regarded as an ethnic slur among Japanese minority populations in other countries, although English-speaking countries differ in the degree...

I plan on building one of THESE. They are fully automatic with a vacuum reservoir. I've bought some epoxy from THIS PLACE and I'd like to give their Stretchlon bagging material a go.

As a bonus, anyone who signs up for a membership will recieve a free puppy.

Yep, homemade adjustable holds, I did want a heal lip, it just didn't work out. This is probably V1.0, we'll see where they go from here. As to not derail this build, please direct further question to my build thread in my sig.