Search results

Looking for a cheap kawi 650 pump and nozzle, no impeller or driveshaft. Thanks

Looking for some advice on impeller selection for the stock pump. If anyone remembers my build thread from 2years ago I built an fx1 for my son. The hull was in the process of a 144 swap when I got it, but against my better judgment I decided to put the stock pump back in it since I didn’t...

Built an fx1 for my son and he would like to try a superjet and I would like a ski I can actually get my hands in the engine compartment. Super tight with stock pipe.. Fully reinforced with 1208 and carbon, external carbon nose piece, tom21? Front sponsons with extra chine removed, wide tray...

So my sons fx1 has a weird issue. The bars get harder to turn the more gas you give it. For a 70lb kid it isn’t ideal.. has brand new steering cable that’s free as can be..doesn’t rub on anything fresh bearings in steering system no excessive slop in nozzle..it’s modded for quick steer and I...

Is one happening this year?

Need an exhaust side bedplate Coupler cover bolt snapped off easier to replace than drill it out..let me know what you have. Thanks

If anyones going to be traveling from Havasu to southern Ca in the next couple weeks and has room to bring a Kx 65 (kids dirtbike) and wants help with their fuel bill let me know please!

Picking up a new moto..have a camper shell on my truck right now and it is convenient for work and would be nice for desert trips to sleep in..have a ski hitch hauler and was thinking of getting a moto one but they look pretty junky unless you spend more than I want to..anyone modify their ski...

Trying to diagnose no spark on a ski im building out of old random parts. Think I can eliminate start/stops as I tried 2 and same issue (also switched the plugs start button is bad on one, I run them reversed anyways with no idle) Stator should be ok as it came out of a ski that sunk so I’m...

Setting up an fx with pre 08 SJ pole and cable..seems like I need to trim end of cable to get steering centered..both couplers are bottomed out..figured I’d ask how other people set them up before I cut a new cable

As I’m installing this supposed fx1 midshaft into a new housing it dawned on me that I should probably make sure it’s for an fx1. Got it off eBay for dirt cheap so hoping it’s correct. Anyone know the length of fx midshaft or know if these #s are correct? Thanks

Mystery stainless impeller..marked 13/17 Couple small nicks but otherwise good condition. 80$ shipped

Looking for an older Jet pilot side entry neoprene vest size medium. (No A10’s) Not a fan of the newer vests and mine is on its last leg after 14years. I found one I liked but it’s a large and it rides up..used is fine thanks

Needed a trailer and seems like everyone wants an arm and a leg for everything these days..back in the day I got a dual zieman with a waveblaster that had a protec pipe in it for 600$...now people want 900$ for a rustbucket trailer with no title.. Found an old boat trailer for 100$..ended up...

So I’m having a weird issue that isn’t really an issue since it runs fine on the water. Just wondering if anyone else has had this happen because I haven’t. Ski runs fine in the water no issues. But when I rev it up out of the water to clear out the waterbox it breaks up/misfires at high rpm...

Using a stock 63n (62t/62t dual 38’s) out of a waveraider I believe in a standup with stock 61x pipe. Does anyone know if the stock couch jetting is the same as a SuperJet? Never had a yamaha with a stock motor/pipe

EDIT: never mind got it hot enough it came out in one shot. Got a cutback stator and impeller for the fx I’m working On..would like to reuse pump bearings as they are still good. Anyway to get them out without ruining them? Also I’m having trouble removing driveshaft..any other method besides...

Has anyone found an alternative to oem ebox screws? I have the largest assortment of screwdrivers known to man and I only have one that fits halfway decent. Would prefer a cap head screw if it was available..there’s a hardware supply place in town that has everything but they don’t have anything...

Anybody have any of the old medium sized die cut hydro turf decals laying around? Not the ones with white writing and black outline. They used to have die cut ones in either black or white..trying to match my pole length to my old ski and the medium sized logo fit perfect on my rrp tubes with...

So my son who just turned 9 has been riding a 550 with us for the last few months and he picked it up quick.. I hate working on kawis and that thing handles like a turd so I needed to build him a Yamaha. He’s only 65lbs so an fx seemed like the perfect choice. @AAlamo was nice enough to bring...