Search results

Yes, they are the same.

Fairly affordable middle ground power on a budget. If you can get a decent deal on a factory/mariner/coffman manifold it will fit and will be an improvement over the bread box. Additionally you can double the length of the belly section and put a stinger fitting in for even more braap. This is...

That is definitely playing a part. Additionally its my weakest skill next to carb tuning so stand by for noob carb questions in the coming weeks!

I am a lazy failure at life. I am capable however unwilling. Thanks for the lengths!

Im taking my ebox and SS switch down to be changed to the stand up lengths at the local respected electrician in a couple of hours. For the Start stop side what is the length? Additionally what is the length on the tail coming out of the ebox? thanks a bunch for the help!

I have an obrien and I dont feel like I am a belly dancer in it. +1 for the obrien jacket. 6'1" using a large for reference.

I decided to tuck my primer away as to reduce the possibility of it being a shin buster. I had a nice open spot in the bracket area. It fits nicely. I also mounted the hood straps and the stainless steel eyelet for the limiting rope.

I was thinking that could work as well. this is sort of what I envision when I was looking at your description.

Something like this may work for opening up my breathing. I would paint them Plum like the ski and glue them in.

I noticed that too, it definitely choked that hood intake. I may shave the lower edge of the rear section of the hood or pop a couple of bow eyes in that corner to allow in some more air. Any thoughts are welcome, unfortunately with this AC pole getting one tube in is about all I can do. For...

I got the bracket fixed at the Machine Shop and it turned out quite nice. I was able to get everything mounted handle pole wise. Only thing I have to do to make the hull ready for the water is to work out a limiting rope, reinstall the hood straps, install the steering and throttle cable, drop...

The mother robot was 100% practical, the hands were titanium and had runners for the mechanical bits. A human was inside that suit not inside green spandex then CGI.

I watched Captain Marvel two nights ago and it was passable. My issues with the movie are mild and not woke or anything, just thought it was underwhelming. The Expanse is really good and IMO making a run for GOT and BSG for best fantasy/scifi show of the last 20 years. The short episode...

Front sponsons are installed. They were not as hard as I was expecting.

Oddly I noticed a difference when I tried it. The chine profile is also different if memory serves. I was a new rider at the time so it could have been chalked up to something unrelated but once I swapped to a SJ specific plate the chine walk went away.

I doubt its a standard config. It will have a 1/4 or less restriction on both legs to keep the flow down a bit. My system is going to be over-pressurized for just about any application so I can vent off a bit of water without concern. Its also a point that I can tune the whole system with. If...

Rear firewall is all finished. All I need to do is put hose clamps on.

I have routed almost everything on the rear firewall foothold area. Everything is mounted and I have silicone in the holes. Still have a half a dozen or so mounting points to put up through the rest of the hull.

I have one son who just turned 13 today. Im currently enjoying my coffee before he wakes up and wants to do all sorts of stuff for his birthday. Happy fathers day all.