Search results

Courtesy of John @ RaceLogic. Thanks again John! Top notch guy. This new template kit is definetly quite a bit different than the original Sport Port. The intake side of the sleeves is not notched anymore, either. I will post pics later. For a freestyle application, this kit is the...

I just wanted to give a big thumbs up for this company (and the guy I've been dealing with, John). When I wrote up my Sport Port thread over at PWCToday last year, he was around to answer questions about some technicalities of porting details, right in that thread, as participating member -...

I took the Superjet out for the first time this year today. I ran the same jetting that I ran successfully for about one hour last year. I know it to be a bit rich. The ski ran horrible - it would load up and take 3 seconds or so to clear up and load up immediately again after letting off the...

Alright...trying to get some ideas here for setting up the MSD Pro Digital II ignition box. I'll have to check what I currently run - it was a setup recommended to me by John @ Jetskisolutions. All I know for sure right now is my static timing - that's set at 30 Deg BTDC. The rest of my...

:biggrin: :bs2: :biggrin:

I am in the process of putting my ski & motor back together. I am working on the carbs right now. For reference, my setup: 61x @ 83mm bore, FS porting (std port heights, exhaust widened, bottom modified for more flow, intakes roughed, exhaust polished 62T cases, ported 35 cc domes, about...

Nuther Superjet...but this one will be cool. :sneaky: :biggrin: Anyways, I started tear down in December. It took a while to strip the hull, sand it, and defoam. For the defoam, I opened up the back purdy good and let loose with a wire wheel. I reinforced back there while I was at...

Right here And it's only 7k! :biggrin:

I'm finally moved into our new - used - house. And finally I get my own garage. See pics - all my Superjet stuff took up four or five moving boxes. LOL... The entire back shelf is full of parts-whore Superjet Stuff.

Home Porting - now with case porting info I authored the Sport Port thread on PWCToday - unfortunately, with the demise of the Tech FAQ you have to really search for that thread to find it. So, I am trying to get all the information and pictures from that thread ported to this forum. I...

So...I am ready to refoam my Roundnose. I have a 5 cuft foam kit (3lbs density) A question for the more experienced here: How do you go about pouring all that liquid into the ski that quickly? I seem to remember there's about 30-60 seconds before the mixed liquid starts expanding. The...

1. If the brain goes out, you're SOL. They are helluva lot expensive. If mine ever goes, I'm back to stock ignition 2. MSD pickups have an annoying habit of going out, and they're not cheap. MSD charges 65 dollars a pop, and if you're unlucky, they will be backordered. 3. Figure out...

What a coincidence, after yesterday's events. :rolleyes:

Hope he's alright. Got this off PWCT.