Search results

In short, no, and trying to make one fit the other would be a good way to waste a lot of time!

Yep, I found exactly the same...

From memory what you are seeing is normal (spark when spinning faster). The signal has to come at a certain speed or greater for the output to be sent to the coils. If you are getting spark, the air gap is ok.

I have used and sell both... If we compare the billet RRP and the billet ATP. The ATP is a much more simple design (ie less going on), and is by all counts lighter. I run/ran the ATP billet on my own personal Footrocket without a pole spring (and I love a super light pole) and found it to be...

Are you sure it's not an engine issue, like a misfire? That can shoe very similar symptoms to cavitation. Another way to check for cavitation is to leave the ski on the trailer, back it into the water and run the ski, when it does it's thing, heavy cavitation will show up as lots of...

I run one of these in my surf boat. So far no leaks, and it would be very easy to spot even the smallest drops of water. John attached a sheet of bakelite sheet to the back of mine. I drilled some holes and mounted with 4 bolts. You can mount it lower, and it takes up less space because its...

Attaboy...

That would work in a perfect world but MSD's QC is a bit hit and miss meaning the coil harness wire colors coming out of the ignition don't always match the colors going in. I did the old plug it in and see. PFP waterboxes do not like this and go from square to round faster than you crap your...

Solder those ones. Tin the wire push it in there and heat up the outside until the solder melts and bonds the two together. The other way to do it is to put 3 or so small pits of solder in the end of the connector, heat it up until it melts and push the wire in. Those connectors are made...

I use stainless nut serts. Drill a hole slightly smaller than needed, bang it in, and you're done. Even has a 6mm thread on the inside so you can seal with a 6mm button head.

I found the Thrust adaptors do actually fit the Blackjacks. Not tight light say the Novi, but enough contact to keep water from getting in past the o-rings. And yes, you could also use slightly thicker o-rings, but the two grooves in the adaptor will determine how big they can be.

I've welded up a few of those boxes to change the outlet angle a little. Lets just say it's 'interesting' stuff to weld

Ok, here's the link to the plans...I would prefer if you visited the page to get 'em rather than posting here for obvious reasons! Help me help you so to speak...They are publically visible even if you aren't on Facebook. Should be right at the top, or, depending on timing, in the wall...

I'm still here, and still have the plans! Flick me an email if you would like a copy, watty at rpcrew dot com The mini in the garage needs some TLC. I've been working in it since 2004 and it still isn't finished. It hasn't even been in for it's first service yet since new.

Try the Braille G9. Very light and compact. Have used a few of them now, and am waiting for a few more to arrive.

Yeah for sure, I guess I'm looking at this from a warranty point of view. If it's set up as per instructions, and it's faulty, well, they should replace it. So, here's something...I have been playing around with this brain that I had here (brand new) that would only spark on the brown channel...

Yep, just wait. I'm the same, usually things turn up in a week or two (US to Oz) but every now and then, I get one that takes several months. You can guarantee that when you re-order the missing parts, and they are sent, the other ones show up. This usually happens with USPS. I think most...

You can run as many grounds as you want, but if you set it up as per the MSD instructions, you will be fine. If they needed big grounds etc, they would specify that in the instructions. I have always set them up as per MSD specs, and never had a problem (I have done a lot of them). I've never...

Don't stress, if it's a new unit and it's faulty out of the box, I'm sure it will be taken care of. It's very easy to trouble shoot, and will take you the best part of 5 minutes. Here in Oz, we have to wait 3 weeks between diagnosing a problem, and getting a replacement (from MSD)

I have seen two brand new brains with faulty channels, including my own. The new system I installed last night has two faulty channels and only one that works (brown)