Search results

Yes I already have ordered the proper screws - I put back the stock ones the next morning after I made that post. I never took it to the water with those ez adjusters installed. They are wrong size for 760 oem 44s. Im pulling flywheel today to verify key is not sheared. I was freaked out by both...

This does not explain why it’s running poor even out of the water now though. I understand if under a load and it bogs could be the pump setup. And yes I do know I am over pitched on this prop. I am more of a free ride guy not a lot of freestyle. It is a 760 not a 701 (not that it’s that huge of...

Yes stock carb linkage and they are both opening all the way open. I am real close to undoing everything I’ve done - putting back to stock. And then trying again in winter to get zeel running proper. I have the stock cdi/ flywheel. When I was running it with the flame arrestors off I could...

Was a brand new set of vforce 3 reeds installed last June 2020. I HOPE they aren’t bad already.

Rode for 2-3 min and then pulled plugs. Front cylinder was burning almost white. B pipe is set up the same it was last year (it ran good) those settings are top closed mid closed bottom open 3/4. All mods I just did this spring: - installed 148 solas mag pump 10/16 skat prop - installed fresh...

Ran it like that this past monday and it did not run good. Front cylinder was super lean also. That’s why I thought I may have to scrap my old jetting setup completely because I switched over to zeel TL from stock cdi / charging flywheel. I’m getting ready to ditch the zeel setup and go back to...

The setting I ran last year with stock cdi was 120L/142.5H 2.0 N&S 95G spring LS 1 1/2 HS 1 1/4 and it ran damn good all summer. Put an easy 40-50 hrs on ski.

I checked my spark and both my cylinders are firing at the same time?! I checked it like 15 times to verify and even brought my mechanic over to double check my eyes were not playing tricks on me. I do not understand what would be causing this. If my flywheel key is sheared then I would think it...

I am pretty certain that my woodruff key has sheared. When I first installed this setup it sounded AMAZING even out of water. I have tried multiple jetting / pop off combo. 4 sets of plugs. Ever since I did the first test ride on the water this past Monday it has sounded WAY different. Almost...

This is going in my krash reaper. Not a race ski. Just about to tear into carbs now. As far as the High speed / low speed adjustment on carbs can anyone point me in the right direction? I am running stock flame arrestor as well.

99.9% certain you are talking about B pipe settings. Also this complete zeel setup was in a ski. I have the lightened 760 TL Flyhweel that he was running. I’m really hoping to get these carb settings dialed in is the issue. I also have a EMP milled higher compression stock head. If I recall...

I bought this zeel setup from an X member over the winter. He just had it made in the late summer 2020 and has two custom maps on it from Paul Lehr. I have the printout of the two curves - was hunting around my shop for it past two days. Couldn’t find it. I have the USB adapter for it. Honestly...

Running stock 44s^ choke flaps removed

Krash reaper - Yamaha 760 stock porting Just rebuilt my engine past winter with wiseco pistons all new gaskets. Installed zeeltronic cdi and went with TL flywheel. I swapped out the 148 solas mag pump from my waveblaster (10/16 skat) I did not touch the jetting or carb settings as the ski ran...

Was just getting ready to order the rhaas conversion kit!

I’m about to do the SAME exact setup on a stock ZXI1100. I am having problems with the CV carbs. I have extra gp1200 carbs. Did you ever figure yours out? I will use this as a baseline if not. Thanks!

SOLD

Looking to sell: 2014 BOB Gen 2 Fiberglass - Built and never abused / never flipped - maybe 5 tanks of fuel through it total. -Turf still looks brand new. - 62t/61x Jetworks freestyle ported 710cc - ADA Girdled head 33cc. Domes - Wiseco Pistons 81.5mm - OEM crank - dual 38s for fuel...

Super clean! GLWS

Paint on bottom before wetsand & polish Solas 148 mag 2 piece jetpump 10/16 skat prop Just waiting on a new set of hood hinges to clear customs (ordered back in January) Removed old seat and replaced with new updated style as well. Old seat tore my knees up BAD. Was bleeding everytime I rode...