Search results

I'm not running an xmetal pole so I can't comment on having to mod the holder. It fit in the rrp holder just fine. But as far as cables go, even if you have to do a little modifying it's well worth it to have a cable you won't have to worry about for a long time.

Blowsion cable. If your stop isn't adjusted correctly the blowsion cable will actually bend a 6mm bolt and not damage the cable at all.

Hey bro.... Why is your pole so short????

pump tunnel

I thought I would dust off some old rc stuff.....

I flipped a chan the other day with a 701.....

Yes there is..... A giant hole will fill it full of water much quicker.

When new scuppers don't leak much if at all. Once they get a little age on them they start leaking a little. It's a maintenance item, when the rubber flap gets worn it needs to be replaced. But there is no quicker way to get water out of a hull. I never bothered to put bilge pumps in my last few...

The southern fired ride is coming up pretty soon. Would be a good chance for you to ride a bunch of aftermarket hulls.

Blowsion shows $775 for mod, add $30 for a limited. I think the issue is supply and demand. Since factory pipe is producing very few of these they have become very hard to get your hands on. We used to be able to buy directly from factory pipe for about $670 or so if I remember correctly.

Pickup wires seem to be pretty brittle, so sometimes you find them broken. Other times you find where they have been rubbing and ground out. You can short the 2 wires of a channel together and see if it sparks to test the channel. You can tap the pickup with a magnet and it should close the...

Check your pickups......

Air leak????

30cc domes are pretty small for that much stroke.

I need one in my ski asap. I have filled many motors with water and it's a huge pain to get the rubber tubing right so it doesn't happen.

I think that the flapper will keep from filling motors full of water.......

I would be game.... 1105 tnt pipe, few salt rides a year.

I ran more on a pump gas dasa 1000 for 2 seasons....

This curve is not that aggressive for pump gas. I wouldn't be even close to scared of it......

Sounds like standard full spec jetting. Pop is usually around 24 or 25. There are a few other issues that may need some attention if you bought them new. Shoot me a pm and I can probably point you in the right direction.