Search results

im thinking of getting one of those $50 plastic white kart tanks. but I see it only has 2 fuel pickups. so I would have to run one fuel line to both carbs and the other fuel pickup will be the return line. ive always ran two pickups and two pulse lines. does anyone have any problems running one...

Just weighed my RN on a bathroom scale. UNBELIEVABLE! Weight without long block, pipe, jet pump and shaft, no rideplate no gas tank. 174 lbs!! so basically it has the aluminum water box, 2 500gph bilges, the MSD TL brain and trigger plate is in it, motor mounts, exhaust hoses, full handlepole...

Are couch mounts taller than sj mounts? I want to buy some for a new build, but I've never done this mod. Just want to make sure my couplers still line up. And I won't have any crazy alignment issues.

I'm assuming its a 82.5mm. Is that correct?

looking for a jazz tank or similar. anyone got a link?

can anyone tell me which reeds these are? they look like 2 stage carbon fiber. that's all I know

I should have searched, but I didn't. getting a new crank this weekend. and going back together with the cases. ive done pretty much all sorts or engine rebuilding except put cases together. this is my first time doing this. what should I put in between the case halves when re assembling the...

I went to split my cases today and I turned my engine upside down to take the bedplates off. I didn't realize the weight of the engine was resting on the connecting rods. I think I bent the rear rod. if so, where is a good place to get the rod replaced? the first pic is of the straight rod...

very bold claims for a SN. http://dallas.craigslist.org/dal/boa/4608805326.html

ive been searching on info on xft hulls and cant seem to find any recent info. anyone know why they went out of business? were they good flat water hulls? the info i did dig up were pretty much mixed reviews. i believe Lenzi rode this hull in competition for a while, didnt he? anyway, any info i...

I just got 2 quotes from both places on getting my cases ported and my cylinder ported. judge was significantly more expensive when it came to case porting. i know art is renowned for his work and does a great job. But so is Judge. i'm looking to get as much out of my small bore 62t and 61x as...

Did a fountain and then my ski started cutting out. then I had to be towed in. My fuel tank vent line popped off causing major water ingestion. I thought it was my ignition at first, but then I noticed water on my plugs. I decided to do a take a fuel sample and here's what I got..

I had a member offer me a 3 channel brain. I think I know the answer to this question, but is there anyway to use this with a single pick up? I have a single trigger with dual magnets. just wondering if it will work? STILL LOOKING FOR A 4270 BRAIN. ANYONE?

i have the old school 4270. its been working fine for me for a few seasons now. But recently when i put the ski in the water, she wont rev up. i have BJ 44s and they're very clean. i doubt its a fuel issue. so anyway, i was dissasembling the ski yesterday and i decided to check my timing. my TL...

why do people ramp the fingers? i have my engine apart right now and took the intake off to inspect the reeds. the ramp stuff is seperated from the fingers and seems to be lifting. its like jb weld or something. does anyone know what this stuff is? i want to replace it myself.

im thinking of buying my brothers xl760 for the wife. but i did a compression check on it and the front cylinder is 148-150psi and the rear one is 135-138 psi. i know the 2 carbs have different jets on the 760s but i was just wondering if the ports are different on the two cylinders or is there...

i have a dual trailer. 2 inch tongue. like a 6 or 700lb capacity. 12 inch wheels. im looking to rebuild my axle bearings but not sure which size to get. is it just the standard 1 inch bearing kit?

im looking for a replacement for my AGM. My AGM weighs 16 freaking pounds. i spoke with Art and the Jetworks weigh 14.2. i dont want to go with a wet cell cause my ski is upside down alot ( i cant roll). sooooooo... i want to go with a LIPO but they all need special chargers i believe. does...

i used to race in region 5 back in 02. i had a superstock sj.msd total loss, mag pump etc. i never radared it, but im pretty sure it was in the 59-60 mph range.im wondering what the fastest skiis are on the water nowadays? i assume its the 4 stroke skiis now. benellis? are they 60mph boats out...

i have a limited 701. dual cooling on a b pipe with R&D pro series head.all has been fine with the build. going on 2 seasons now. last week i noticed my water lines spitting and sputtering. not a solid stream like they should be. of course the engine is hot to the touch which isnt good.i have 3...