Search results

stock tray is 12 inches wide or just a hair under, this tray is now 15 inches wide. I also suggested that I drop the top of the gunwhale so that some foam can be placed under the turf just like the sj. filled the water spout hole with thickened epoxy. ground the back of the gunwhale down and...

the toughest area to do was the corner, I wanted to use the stock side but with the built in slope at the top it wasnt gonna just line up perfect. so I lined the base of the side up to width and that was inline with the front of the tray at the top corner. I cut some 3/4pvc I had laying around...

I get orders for my wide fx tray all the time and basically I made that part to be an easy way to do the 144 pump install. you have to cut the tray up to do it. and while its nice to be able to drop in a complete wide tray its not the easiest way to do it if you just want a wider tray. I...

scray has a good point on the wires. thats an easy one and happens frequently. I believe he is also on the right path regarding the fuel. overly rich mixture will shut the ski down quick. I had no luck with factorypipes jet specs on my ski. I can look and see where I am at now. I have...

find a way to add slow carbs to your diet, like beans. they fill you up and are healthier for you.

I have like 2 pics, when Im working I never stop to think about pics just the work ahead and having resin on my hands most of the time and expensive smart phones are not a good mix.

since you didnt reply to my question I will just say that if you didnt know what your popoff was originally and changed the springs, even if they look like the old, you may have lowered your popoff accidentally and now have an overly rich carb. I am not trying to be an all knowing D I C K but...

be aware that the spline tool is still sloppy, we measured the overall travel of say 2inches and split it. centered if off the slop so to speak. not exactly precise but at least we cut the guessing down to minimum.

what needle and seat, spring and popoff are you running?

Im afraid I dont understand most of the stuff on the linode page, and given time I probably could but today I dont have the luxury. I looked into bluehost before I posted this thread and it looked good until I saw that it was bought out and there were a lot of negative comments. again their...

okay so now I am ready to try a new web host. had an issue with continual warnings about out of date scripts and problems with WordPress could not get any resolution through their help and I'm looking for new web host tried to do some internet research but everything seems to be blog's...

aahhh I been busy and didnt renew my domain. workin on fixin it now.

well it looks like kc has a solution for an easy install with use of sj shaft for a setback pump and the other way is to use the stock fx dimensions with the fx shaft. we have a setback but it is accomplished with a spacer. to me it feels like my bigbore sj but lighter and more nimble. I have...

fx shaft and sj tunnel will put everything back where it originally was.

im interested now lets see the centerfold er I mean the engine pic. beautiful ski by the way.

cool ski, what up with the bondline? it looks like its extended.

when I finish these 2 hull builds I will do a fixed steer hood.

not really, I have been trying to keep up with making parts and repairing skis. had some time to trim materials for the hood and was going to try to get that made today but I have been busy and just had to stop for a minute until the feeling of wanting to hurl passed. I think I will be doing...

im going to be infusing a hood soon. still have to make a liner for it. as far as trim I am sure there is going to be a certain amount of customizing from one hull to another. I dont mind doing a few extra tweaks and do most of the itching so you dont have to. foam filled vs scupper. or...

I will get some better pics. he has it at his shop while I make the final few pieces. I have some other work to do today but I will keep posting progress as it happens.