Search results

The difference is it will directly hook up just like a 38BN carb and the WR500 jetting works perfectly on a JS300 engine, I would know I came up with the idea , at any rate any of the Seadoo 38SBN carbs off of a 587 should also work with a different throttle drum plate and using a Primer setup ...

The molds are clearly gel coated and waiting for fiberglass. I’m pretty sure it’s getting laid up today. I hope you are correct and that he gets to ride it soon, no worries.

Sent from my iPhone using Tapatalk I don't see a hull in those pics , I see a set of molds that haven't even been prepped to lay a hull up in yet, and you are dealing with Jeff , so yeah good luck on this.

Might be the best thing to happen with one of those hulls lol

https://www.pwctoday.com/forum/technical-discussion/vintage-skis/yamaha-wb1/170507-chopped-shaved-blaster-seat The searchmaster has spoken !

I know you will not want to hear this but here goes anyway , if it was cranking properly and you replaced the reeds and now it isn't cranking properly it could be the reeds , this is the approach I take to diagnosing stuff , what changed , backtrack from there . The two things that stand out...

Tons of stuff it could be , that is why I asked about the starting procedure, to get a little more insight into the issue at hand .

Run me through the exact procedure it takes to get the ski started . It won't take much of an air leak to cause this issue, I chased a similar issue on a 650SX for a bit turns out the cap on the oil injection fitting was leaking just enough to make it pop and be hard to start , removed the cap...

Under which owner , Skip ?

Most likely they are set up like the Toyota 22r and it uses oil pressure to push out the timing chain tensioner, a lot of four cylinder autos are set up that way, I noticed on my 2RZ it has a clock spring type tensioner like an ATV or motorcycle uses , but on the old 22r setup oil pressure = no...

We have a Hyundia and other than replacing a few coil packs it has been great , it's just a second car now , but my understanding from doing a lot of reading is when Kias and Hyundia's go down they go down hard and fast and they are not ever worth fixing . It is damn hard to beat the...

I know I need a complete set of bolts for a Yamaha 760 top end, cylinder bolts, head bolts , exhaust manifold bolts and the bolts that hold on the exhaust brackets to the head and cylinder.

Major Starting Difficulty

We used to call them Reck and Destroy back in the day.

You can only claim a loss for so long, after that the IRS reclassifies your business as a hobby and you can no longer take things off as deductions .

This thread is John Belushi approved.

Corporate greed is one of the biggest factors that has hurt American jobs and workers, I will give you an example that you won't hear in any news agency. It happened not too far from here in a little town called Tallassee in Alabama , just outside of Auburn and not to far from Lake Martin and...

That is where all the good ideas come form, that's how the 300SX craze was started, that's I found out the Tigershark coupler would work on a Kawasaki driveshaft to adapt in a Yamaha engine , sometimes that's the best way.

So far I have watermelons and cantaloupes in their own plot , I have Tomatoes and Kentucky blue wonder beans planted in a Florida weave trellis , I have Zucchini and squash planted , bell peppers and eggplant planted and cucumbers and snow peas planted in two different places. I still have...