Search results

Long shot here but I figured I would try and keep with just this forum and maybe but some off chance someone has the answers. I have a 2000 seadoo GTI 2 stroke. Will not crank over, I pulled the ebox and jumped the starter solenoid but not sure where that leaves me now? Switch? Electronic Key...

Anybody have similar issue and find out what it is? Was using a stock gp1200 plastic one, got a protec metal one now but don't want to break it. setup is a 155 skat setback pump, with bpipe coupler, motor is a TPE 1105 with all the goodies. Is the plastic just not strong enough or an issue on my...

Anybody have any pictures of the inside of the MSD TL brain? Looking at getting a system built or building one myself. Haven't seen pics of the inside of the brain where all the switches are and how you install your curve. The wiring doesn't scare me. Setting the curve and the switches being...

Wondering how to tell these dry suits apart. Not looking to spend like 600 bucks. I think a good wetsuit will do but rather a dry suit since i have used a short sleeve wetsuit in the past and just not a fan. Wanting a full length suit long sleeve, long legs. I will be running wrestling shoes but...

Just wanting to see who is already there or who all will be making it to Havasu. Wanting to meet some more members and put some faces to screen names. Last year it was nice to finally meet @Big Kahuna and aquaholic I know a few people who will be making it. @JetFiend @Todd grochowski @rubbertoe...

Finishing up a 701 and running a bpipe. The motor is all stock minus the bpipe so I figured single cooling is enough from what I have read. Do you also agree with no other mods single is fine or do dual cooling and have an adjustment valve on the pump's main feed. If I stick with the single...

Have a camp site for World finals all to myself and a buddy. Both in a tent hammocks so do not need the entire site. Shared the site last year and that was great. looking for anybody looking to share the campsite with us. Good company, with or without skis. Tents or a trailer is fine, no...

Yamaha based motor, zero FW, and MSD enhancer. Box is from an 02 Superjet, MSD in few months old. Never had this before. Plugged in battery, few cycles to prime motor, then it starts cranking on its own. Disconnected battery. Thought S/S switch was acting up so I took it apart, did a few things...

Had this motor since beginning of July. Motor is running pump gas, stock stroke, 49s, pfp, zero FW and Msd enhancer. Stock timing. Ski has ran great but past two weeks I noticed plugs were black and ski bogged on me and didn't want to run. New plugs ski ran great. Maybe 12 gallons later bog...

There has been many good things said about this company lately and im just going to add to it. First spoke to Erik in havasu at body beach about his motors, how they are made, and rode the two havoc skis. About a month after havasu I saw a few of these motors up for sale and looked into a used...

Looking for some quad rims and tires. Both used and somewhere close to 21 inches overall height and close to 12 inches width. They are not going on a quad so do not need specifics. Simply need to hold air. Thread isn't even that important. Simply hold air so no slits or big holes

Ives been putting on alot of hours on this superjet of mine lately. Motor and electronics are out of a 95 wave raider, but put on a 61x cylinder and head, rejetted the carbs and has been running great. Bottom end is a bit rich but nothing too bad. The issue started yesterday at the lake, it ran...

I installed a stock 650 motor and everything on the ski is stock except a 750 carb with fuel pump attached because my 650 carb took a dump. So basically my motor is still stock 650 power but in a 550 hull. The hull is an 85 if that identifies the pump but what impeller should i use. took to the...

Was water testing a completely stock 701 superjet and it had a good stream coming from the pisser from idle but when I gave the ski throttle rather than the stream coming out farther, the stream from the pisser was less than idle. The flow would return to idling amount. Any ideas? Cylinders were...

Ive been searching to find a decent diagram of the fuel system of the kawi 650 system. I have the fuel pump with the single end facing the fuel regulator (feed from gas tank), the top of the fuel pump going to the bottom of the carb (feed line I believe) the other part of the fuel pump has a...

I have a few month old 148skat trak pump. i believe it is a D75 (have the paper at home to verify) and the pitch impeller is a 9/14. looking to trade for a 10/16 or 11/17 in similar condition. As far as i could see when pump was on the hull the whole assembly was flawless so Im going to say with...

I have a backie chan that already has a limiting rope and racket strap installed on the dash. Looking to install my primer somewhere that is clean with the hull. I don't have a picture right now but can try and get something in a few days. Was looking for pictures of people with backie chans and...

I've looked around and I can't find this style vest that is coast guard approved. Does anyone know about this style and if ANYONE even makes one

Anybody have a sweet hookup or know a way to get these a bit cheaper. I was looking at the gallon is 50 bucks. thats nuts hah, im used to 15 bucks for quicksilver at Walmart! if anybody knows of anything id definitely like to hear * also what kind are you guys using. I was looking to order and...

Im debating about selling a Blaster 1100 and seeing if anybody would be interested in the ski. Kawi 1100 motor, its a project as of right now but can be finished for buyer if wanted or just sold with the parts and be just needing a few parts (couplers, impeller, and assembly). I do not mind...