Recent content by airtime ryan

Thanx again- U D Mon.

Thanx Man.So is a 06 rn sj a 61x case and if so would the crank from that ski fit in a 62T case of de 98 rn sj.

REASON IM ASKIN IS I HAVE A 61X CRANK AND SOME1 WANTS TO KNOW WILL IT FIT THEIR 98 RNSJ-HOPE SOMEONE CAN HALP.THANX.

Hi-do any1 know what the cases on a 98 rn sj type- 61x or 62t. Hope some1 can help out -thanx.

Just put it in the hose right where the red arrow is in the diagram and u should be sorted,but make sure ur water box is gettin water.run the ski on ur garden hose and look at ur exhaust open end,water should be comin out here when u rev ur motor and also out ur pisser.Then go have some fun and...

Yes that is the way ive my set-up. in the diagram i showed u,1 of the outlets at top goes out to a pisser,but i found that i lost alot of water there when i could have used it to futher cool the mid pipe so that is why i T off it. if u get a new nozzle that comes with a silicone tube and just...

check out this picture, i have the 2 outlets in top of head connected together instead of whats in the picture and just T off that small hose on top and then run to the bottom of the mid pipe. they are lots of different ways of doing it,its down to personall choice. if ur not sure just print in...

Hi i just installed a billet atp girdle on my motor last week,had 2 remove the pro-tec cast head due 2 cylinder crack.had to change my coolin hose set up cause the atp head has now 2 outlett holes. i tried a few set-ups but i tink this might be my best (bottom power wise)the main feed from the...

hi chris,im looki for some needle valves & seats for my 05 superjet stock carbs, do u have any,thanx

Im no expert here either,but im runnin a very simular set-up to u.p-tec pipe,concord impeller but when i got the full wake up kit from p-tec ,it came with flame arrestors(dont tink thats ur problem dow. ive also a msd enhancer and they gave me the same carb spring as u 95g and also my pop-off is...

Would the concord impeller be better in jumping and surf riding also.

Hi,was wondering which impeller would best suit my superjet.Its got a full protec wake up kit with msd enhancer.Ive got 2 solas impellers.1 is the concord 13/17 and the other is super chamber s 14/17. Im really looking for more low end rather than top speed. hope some1 can help me on this. Thanx.

Iused to live in the golden state,but over here the place is in an awful state. i miss socal.

do any1 know if i can put a girdle head (other than a pro-tec girdle head) on my cylinder block that i can attach my mach1 pipe to the top of head.i need to get a girdle head cause a crack (seems all to common on thia site)has appeared on the intake side of my block,just behind the front lower...