??????Selling Ultimate Squarenose???????

F

Freestyleriverrat

Guest
Not to steal TheSimpleManLance's thunder, but I was just wondering what you guys think I could get for my squarenose. Obviously I would not get what I put into it :bigeyes: but I was just curious. I have a figure in my head but I was looking for some feedback. Pic are on my link below

Hull

Waterdawg Kustoms X-holds
XFT carbon/kevlar pole
Custom billit 3pc XFT bracket
24/7 nose
dual 24/7 scuppers
modified hood
Custom Paint
Single blowsion front exhaust
Defoamed and refoamed in spring 2006
XFT turnplate and bars
Waterdawg Kustoms Carbon D-cut ride plate
reinforced sides and nose

Pump and driveline

13/17 concord
Blueprinted pump
stubby cone
Bored nozzel (metal nozzel out of blaster)
Trim up pro-tec trim system
New midshaft, housing and bearings
Billit Riva couplers
dual cooling

Motor

Lamey PV cylinder w/ Kawi flat top pistons
standard stroke hot rods crank
Ported and epoxy filled 62t cases
v-force gen 1 reeds
R&D manifold
dual 48mm Riva power bombs
Jss rebuilt stator, stock electronics w/ MSD enhancer
Lightened flywheel by pro-tec
Complete MSD single coil TL ignition system
New motor mounts
Factory B-pipe w/ mod chamber
FP aluminum waterbox
jetworks FCV
ADA girdled head

probably some more misc stuff through out the ski.

**No I am not selling the ski, just curious
 
Last edited by a moderator:
F

Freestyleriverrat

Guest
I'm not. I just saw that other thread and it got me curious. It is a hell of a ski, but it is a squarenose. So it just got me thinking. Alot of guys prefer the rounds
 
Matt_E

Matt_E

steals hub caps from cars
Site Supporter
Location
at peace
It is a hell of a ski, but it is a squarenose.
Click to expand...

Is that a problem for you? It's a damn nice ski, setup to what you like.
I wouldn't dream of getting rid of it.
I thought I didn't like squares, but after riding one that's been properly set up, with good power, and a short pole, I would ride it.

I'm gonna take a stab at the price....5k?
 
Matt_E

Matt_E

steals hub caps from cars
Site Supporter
Location
at peace
I know...here's what I think. I don't believe you can ask very much for the hull. Yeah, it's got a nice paintjob, it's got nice accessories, all that. But you can get very nice hulled Roundies for 3.5k and up - including nice mods.
 
F

Freestyleriverrat

Guest
but do those roundies have a super trick XFT cart tank :haha: :biggthumpup:
 
Mike W

Mike W

Infidel
Location
North Florida
Its priceless if you have it set up the way you like it. I like my square and all and its in good shape but I really dont think I can get out ouf it what I put into it. Its kind of like when you buy a car and your so top heavy you will loose your ass if you traded it in. Your better off keeping it IMO.
 
CoreyLKN

CoreyLKN

LKN Freestyle Militia
Location
Lake norman, nc
Put it on ebay and claim it goes 65mph and has lots of protoype parts and start the bidding at like $8000.:biggthumpup:

Just kidding, but really that is a sick squarenose:woot: and i hope mine turn out as good as that.:Banane01:
 
jetskiking

jetskiking

Im done sanding!!!
Location
Dallas Georgia
Freestyleriverrat said:
Yup, everything is new on the motor and when you take into account the 700 carbs, $450 case porting job ect it comes out to 3800 w/o electronics.
Click to expand...
Not questioning thats what you spent but Im also not saying you didn't pay to much.Heres the problem. Its still a square no matter what you have done to it. The person that would buy that ski would probably pretty much want it for the motor other than that its just a square with some cool mods. You will never get what you have into it round or square. I honestly think you could only fetch 4 grand for the whole ski and you might have to part it out to get that. I wish I could say you would get more but its just a fact. Dont get me wrong I love squares and thats pretty much what my whole crew rides but it is what it is. I even know someone thats putting the new ADA in there square:sneaky: but they still know they are doing it just for their own satisfaction and wont recover their money.Not trying to bust your chops on the motor but I know someone that just put a together 5 mil lamey pv stroker with ported and epoxied cases new rebuilt rad crank for less than 3 grand.


I hope you sell it for more and prove me wrong
 
F

Freestyleriverrat

Guest
Good points. And if I were to sell the ski they are all good considerations. Reguardless of whether or not it is a square I would not let it go for anything less than 8K. To much sentimental value I guess.........but you forget the is the Ultimate Squarenose we are talking about here :woot: :haha: I am sure you can build a stroker laemy for 3k but 4k was my estimate w/ the b-pipe, 2 ignitions (MSD TL and stock) ect. I my mind 6-7K would be a steal.

If you buy it for 45K I guarentee it will do BR's.......I will even deliver it in person and do one for you just to prove it (Lenzi replica boat joke)
 
Matt_E

Matt_E

steals hub caps from cars
Site Supporter
Location
at peace
Since you're not letting it go for less than 8k, I guarantee you won't have to worry about selling it.
 
2

2nd nature

Location
atlanta ga
Matt_E said:
Since you're not letting it go for less than 8k, I guarantee you won't have to worry about selling it.
Click to expand...
its kind of like a car how much can you really sell a tricked out 1992 honda accord for?i dont care if you put 20,000.00 ion it. i have a square i built it to keep. because i know know one will pay even close to what i have in it.if your trying to get money part the whole ski out and keep the hull for it. id bet with out the handle pole you couldnt get 500.00 for the hull with pole maybe 500 -600
 
accbr

accbr

addicted
Location
Lexington, KY
Probably get more if you parted it out. By a round hull and put your motor in. I'd be interested in the square hull. You gonna sell that Magoo ported cylinder, since you have the lamey on there?
 
F

Freestyleriverrat

Guest
accbr said:
Probably get more if you parted it out. By a round hull and put your motor in. I'd be interested in the square hull. You gonna sell that Magoo ported cylinder, since you have the lamey on there?
Click to expand...

Sale already pending on the magoo cylinder, forged pistons, domes and dual 44's.
 
You must log in or register to reply here.
Top Bottom