- Location
- Columbia River Gorge, Wa.
Hi Every one
I was searching ebay and I ran across this Blowsion/JSU Built SXR starting bid at $6,000
Seems to be a good buy.
http://cgi.ebay.com/ebaymotors/BLOW...QQitemZ130311607569QQptZPersonalQ5fWatercraft
"BLOWSION/JSU BUILT FULL FREERIDE/FREESTYLE SXR 800
Vehicle Description
Custom 2003 Kawasaki SXR 800 built by Blowsion
2003 world finals paint with color change gold (ridden by Josh Lustic for the 2003 world finals)
Why buy that boring stock ski when you can have everyone drooling over this awesome BLOWSION custom!
I am waiting for my new Eric Malone Q8 1000 and need to sell this beauty to make room!
Steve Webster/JSU build Superstock 800 motor
Factory Pipe with dual exhaust and billet exhaust outlets
Advent Ignition
Lightened Total Loss Flywheel
R & D Matched port intake manifold with V-Force reeds
JSU reed spacers
True and Welded Crankshaft
Snap ring crank case
JSU Girdled head
Dual Cooling
Blowsion Raptor lowered hood
UMI aluminum handle pole and conversion kit
UMI steering and bars
Blowsion 1 way valve
Kicker footwells
Custom Hydro-turf mats - Beautiful condition
SKAT TRAK freestyle impeller
SE Scoopp grate
Blowsion dual fuel pickup with under hood cap
UMI finger throttle
Blowsion trim setup
Blowsion side and nose reinforcement
Side rail extension kit
Carbon chin pad (pad has small tear but comes with a new cover)
Billage pump
Tubbie sponsons
ODI lock on grips and more!
Must see and ride ski to believe! Fast stable ski that runs with sit downs but can sub, nose stab and freestyle nicely!
I am picky and I would give the ski a 9.5 out of 10 because of a few minor scratches (Sorry, I used it!)
It would cost over $15,000.00 to build this ski!
Ski needs 100 octane gas or better, I run Castor 927 2 cycle oil.
Total loss ignition means battery needs charging between rides.
I will crate the ski for 150.00
Buyer is responsible for shipping
Test rides available in Brainerd, MN to serious buyers"
I was searching ebay and I ran across this Blowsion/JSU Built SXR starting bid at $6,000
Seems to be a good buy.
http://cgi.ebay.com/ebaymotors/BLOW...QQitemZ130311607569QQptZPersonalQ5fWatercraft
"BLOWSION/JSU BUILT FULL FREERIDE/FREESTYLE SXR 800
Vehicle Description
Custom 2003 Kawasaki SXR 800 built by Blowsion
2003 world finals paint with color change gold (ridden by Josh Lustic for the 2003 world finals)
Why buy that boring stock ski when you can have everyone drooling over this awesome BLOWSION custom!
I am waiting for my new Eric Malone Q8 1000 and need to sell this beauty to make room!
Steve Webster/JSU build Superstock 800 motor
Factory Pipe with dual exhaust and billet exhaust outlets
Advent Ignition
Lightened Total Loss Flywheel
R & D Matched port intake manifold with V-Force reeds
JSU reed spacers
True and Welded Crankshaft
Snap ring crank case
JSU Girdled head
Dual Cooling
Blowsion Raptor lowered hood
UMI aluminum handle pole and conversion kit
UMI steering and bars
Blowsion 1 way valve
Kicker footwells
Custom Hydro-turf mats - Beautiful condition
SKAT TRAK freestyle impeller
SE Scoopp grate
Blowsion dual fuel pickup with under hood cap
UMI finger throttle
Blowsion trim setup
Blowsion side and nose reinforcement
Side rail extension kit
Carbon chin pad (pad has small tear but comes with a new cover)
Billage pump
Tubbie sponsons
ODI lock on grips and more!
Must see and ride ski to believe! Fast stable ski that runs with sit downs but can sub, nose stab and freestyle nicely!
I am picky and I would give the ski a 9.5 out of 10 because of a few minor scratches (Sorry, I used it!)
It would cost over $15,000.00 to build this ski!
Ski needs 100 octane gas or better, I run Castor 927 2 cycle oil.
Total loss ignition means battery needs charging between rides.
I will crate the ski for 150.00
Buyer is responsible for shipping
Test rides available in Brainerd, MN to serious buyers"
Last edited: