SN to RN swap?

[Liquid Graffix]

will everything on the SN swap over to the RN hull? Thinking of ordering an aftermarket RN hull and picking up an older SN for cheap and changing everything over. Are the parts the same on the two styles? Anyone know of any complications i might run into?

thanx-

 

[oxnard111]

This has been covered a couple times, but I just tired searching and didn't come up with the best results.

You'll be missing some things you need for the aftermarket hull.

- Pole bracket
- Handle pole
- Chinpad
- If you pick up a '93 and under square, you'll need a '94+ midshaft
- Long exhaust tube (some say the square nose tube can be stretched to fit if you stick it in boiling water)


Not sure of what else, but those are the big things.

 

[let it loose]

This has been covered a couple times, but I just tired searching and didn't come up with the best results.

You'll be missing some things you need for the aftermarket hull.

- Pole bracket
- Handle pole
- Chinpad
- If you pick up a '93 and under square, you'll need a '94+ midshaft
- Long exhaust tube (some say the square nose tube can be stretched to fit if you stick it in boiling water)


Not sure of what else, but those are the big things.

+1... I just swapped a everything from a 93 into my 99 hull. Used the midshaft from my 99 and the exhaust tube but everything else is the same except those other parts above and of course the hood. Very easy swap to do imo.

 

[Liquid Graffix]

thank you guys so much! i think in the end it will be a bit cheaper to do it this way than to buy an 08.