A little birthday present for myself...

[vomitspot]

whats a blaster ltd chabber worth to ya?
ive got a customer with a ltd pipe and i could possibly talk him into a mod chamber i fyou make him a offer on his ltd chamber
jason

 

[shawn_NJ]

Dave you interested??? BRAPPPPPPPPPPPPPPPPPPP! My drunkin brother modeled the chamber for us, while bandaging his injured elbow from daytona....

 

[Scorn800]

I do have this exhaust chamber but I would have to do some creative exhaust hose running. I am mainly just wanting a simple swap at the moment. No exotic gotta all winter to mod stuff kind of build. It will be warm before I know it...

Did Wax use a 750 mod chamber in x2?
Could be a nice combo with sxr motor
Very nice birthday present, green is good:439:

 

[w-nut]

yes wax was running a mod chamber in the yellow x2 in australia i know where one is as well but dont know if i wont to try it . i have a 750 limited ,650 fpp and a blaster limited chamber on the way .
i have used 650 pipe on a sxr 800 engine that i ran in mine and it ran great with that . i would happly run the fpp 650 chamber till you find another chamber that you wont to run .
ive just picked up a set off sxr carbs for my 800 as well . i am going to run fpp recomended jetting in it ive been told that should be pretty close ,its got to be a dam goood starting point .
prop wise i am running a 13/18 c75 big hub scat in a 750 pump . with my set up i think i might have to pitch it up just a wee bit . it sits that close to the limiter (650 elecs) when i run it pined

 

[dbrutherford]

Shawn I will take that chamber price denepdent. I will shoot you a PM.

Scorn, yeah that chamber I posted in the red 750 SX is the old style SX mod chamber. It has the outlet at the end of the chamber rather than the center bleed outlet. I am not so totallt sure the center bleed will fit. Vumad on here was trying one but I don't know if he fully fitted it yet.

The other one I posted a pic of is not as big as you would think. I like the 650 chamber since it is a straight shot. But yeah it is amaller than an SJ mod or limited.

I wonder how the old XiR chamber would work...?

 

[Big Kahuna]

hey DB, that chamber you posted was the mod, more for top end race setups.. It would be a bitch to get plumbed up.

 

[dbrutherford]

hey DB, that chamber you posted was the mod, more for top end race setups.. It would be a bitch to get plumbed up.

yeah both the XiR chamber and the the mod chamber in the red SX will both be a PITA.

That I why I need a WB limited chamber. I can use my 650 chamber but it is smaller than a limited SJ chamber all over. It is smaller at the head pipe junction, chamber diameter, and stinger diameter.

So if anyone has a WB limited, let me know. I am calling FPP today...

 

[Big Kahuna]

why not a SJ limited or mod chamber???

 

[x2skier]

I'm convinced the Kawi center bleed chambers will work. They can't be that much different than the Blaster mod chamber. Probably need a different tank. I did right rear exhaust but could easily use the X2 style left entry / exit style waterbox.

 

[x2skier]

Shawn I will take that chamber price denepdent. I will shoot you a PM.

Scorn, yeah that chamber I posted in the red 750 SX is the old style SX mod chamber. It has the outlet at the end of the chamber rather than the center bleed outlet. I am not so totallt sure the center bleed will fit. Vumad on here was trying one but I don't know if he fully fitted it yet.

The other one I posted a pic of is not as big as you would think. I like the 650 chamber since it is a straight shot. But yeah it is amaller than an SJ mod or limited.

I wonder how the old XiR chamber would work...?

Is that your Xir exhaust setup or just a picture of one? I may be interested in buying it.

 

[dbrutherford]

As far as I know, Paul at LPW jad just a chamber for sale. It had the mount cut off it. Recently there was a complete SS Xi on ebay with that pipe. the whole ski only sold for 600 bucks. If I was closer I would have bought it and parted it out.

All I have from that setup is the manifold and I am using it.

I considered an SJ limited or mod FPP chamber but the tank gets in the way.

For now, I think I will just use my FPP 650 chamber. I may have someone weld a bigger stinger on it or have Chuckie at Team Scream do his mod on it.

 

[x2skier]

Recently there was a complete SS Xi on ebay with that pipe. the whole ski only sold for 600 bucks. If I was closer I would have bought it and parted it out.
QUOTE]

I seen that and was going to bid but really wasn't into having another hull and trailer to get rid of. Somebody got a really good deal though.

 

[dbrutherford]

Recently there was a complete SS Xi on ebay with that pipe. the whole ski only sold for 600 bucks. If I was closer I would have bought it and parted it out.
QUOTE]

I seen that and was going to bid but really wasn't into having another hull and trailer to get rid of. Somebody got a really good deal though.

Sure did. I would have bid on it if I was still in WV. I would have just cut up that hull, not a high demand there. I offered to buy the pipe. I was leary about the engine. Now i have an engine but not the exact pipe I want.

 

[dbrutherford]

Had to add a few more parts from Hot Products, Blowsion, and McMaster Carr to my birthday presents. After all, today is the actual day. Now if they would just get here already! I also hope my tax returns come and good old mom sends a big check too!

 

[Big Kahuna]

happy birthday!