Exit/reduction nozzles list?

[Christian_83]

Hi guys
Does anyone have an updated list for this? Primarily 155mm nozzles? I interested in which is with 0deg and which is with 5deg (and what the ID / OD is)
I have read the old thread were #zero made a list.

 

[N3vrSat1sfied]

sub'd

 

[Christian_83]

Bump, anyone that can chime in on this topic?

 

[Freakrider]

I can tell you my nozzle off a GP1200 is 5 degrees trimmed up and was 86.5 mm stock and was able to bore it out to 90.35 mm. A bore that large made it thin on the outer edge but it tapers thicker quickly.

 

[Christian_83]

Well my exit nozzle is also from a GP 1200, 65U but not 5deg. A friend has a 65U nozzle which is not 5deg.
@Freakrider do you have a picture of your exit nozzle?

 

[Freakrider]

 

[Freakrider]

What's your goal to get 5 degrees extra trim I would assume ?

 

[Christian_83]

Isn that the KDX pantydropper hull in that pic? Are you sure its a 5deg nozzle.

I would really like to know how to know/verify that its a 5deg nozzle other that messaure or visual.

yes, its to get 5deg static. I know i can get it by making a steering nozzle stop at 5 deg. But i really would like the 5deg exit nozzle.

 

[AdzUK]

My GP1200 65U nozzle is a 0 degree one, not sure what ones the 5 degree ones come off.

 

[Freakrider]

Yes KDX panty dropper back in action. Not sure if full 5 degrees might be 4.35 but it's turned up a lot from a 98 GP1200. Did you see this chart that #zero posted before ?

 

[Christian_83]

yes i do have that chart, but I'm missing the 65U(unless the 65V is the 65U) and 63M nozzle. Thats why i posted this thread. How do you like the KDX ?

 

[Freakrider]

KDX is awesome with the 900R and 155 JM Skat pump, she hooks up strong !

 

[N3vrSat1sfied]

yes i do have that chart, but I'm missing the 65U(unless the 65V is the 65U) and 63M nozzle. Thats why i posted this thread. How do you like the KDX ?

65V is a 144/148 bolt pattern, but with a larger volume than 62t nozzles. Came off Gp760's etc

 

[Freakrider]

I did a Google search for 155mm pump nozzle list to no avail, I would suggest edit title of thread to add 155 so it might strike up more attention to guys running 155 pumps. I would like to see more info about these nozzles myself.

 

[hornedogg79]

Yamaha added the 5° nozzle to the gp1200 in 98. It would hook a corner far too aggressive for the average rec rider. Ski would turn and rider kept going straight lol.

Sent from my SM-G900V using Tapatalk