Front Exhaust and water box.

[Mark44]

Anyone see a problem with just installing another outlet next to the original outlet on the water box to run the front exhaust off of? I was planning on 2” front and 2 ½” rear.

Mark44 Brap!

 

[Rickster]

Anyone see a problem with just installing another outlet next to the original outlet on the water box to run the front exhaust off of? I was planning on 2” front and 2 ½” rear.

Mark44 Brap!

I was just talking about this yesterday, and I don't see any reason why it would not work. It would be a lot more clean than a tee...

 

[WaveDemon]

I don't know what goes into the design of them but there might be a loss in back preassure because you are nearly doubling the size of the outlet.

 

[Katie]

Anyone see a problem with just installing another outlet next to the original outlet on the water box to run the front exhaust off of? I was planning on 2” front and 2 ½” rear.

Mark44 Brap!

I see a HUGE problem with the guy thats going to weld it on :biggrin: At least try not to set anything on fire this time.

Just do it....faster you get yours to work, faster I get mine. :sneaky:

Katie

 

[Mark44]

I see a HUGE problem with the guy thats going to weld it on :biggrin: At least try not to set anything on fire this time.

Just do it....faster you get yours to work, faster I get mine. :sneaky:

Katie

Just what I need comments from the sponsored rider. You just ride and practice and I will take care of your ski. :cheer:

When you get home please have the water box out of the black ski. Thanks!

Mark44 Brap!

 

[Mark44]

I was just talking about this yesterday, and I don't see any reason why it would not work. It would be a lot more clean than a tee...

I agree that is why I am going in this direction. Clean and simple.:biggrin:

Mark44

 

[Katie]

Just what I need comments from the sponsored rider. You just ride and practice and I will take care of your ski. :cheer:

When you get home please have the water box out of the black ski. Thanks!

Mark44 Brap!

If I do that I might as well swap my awesome clean non ported motor...for your crappy ported one :smile:

Katie

 

[Rickster]

I agree that is why I am going in this direction. Clean and simple.:biggrin:

Mark44

Let me know how it goes... :biggthumpup:

 

[Mark44]

Observation I pulled the water box and looked inside the outlet pipe. The outlet runs to the bottom of the water box. I believe I need to do the same thing for my 2" pipe that will be the front exhaust. I will cut a 2" hole in the location of the new pipe and take a look inside.

Mark44

 

[Speedfreak]

I am still saying LOUD.. IF you want loud exhaust then open it up so that there is no change in the sound wave speed..... Ever ride in a truck with open headers.

 

[jeepmark4x4]

I'm running no waterbox, its bypassed with a peice of motorcycle exhaust i had lying around....it rocks, not that much louder...just alittle raspy when off the throttle

 

[Mark44]

x

I am still saying LOUD.. IF you want loud exhaust then open it up so that there is no change in the sound wave speed..... Ever ride in a truck with open headers.

the new pipe for the front will also be on the back side of the baffel like the exit is now.

:biggthumpup:
Mark44

 

[robertg]

I was thinking of removing my outlet all together and going to two small front outlets. I was thinking of having one on each side. It would be nice not to have that hose running through the engine compartment.

 

[Speedfreak]

It would make a clean engine compartment but why not just use one side exhaust pipe. A lot of pro riders have just one side exhaust only.

Unless you are like me and can't stand things that arn't symetrical

 

[robertg]

I have a couple of the old JS550 side outlets that are really small in diameter. You would need two so the exhaust is not restricted.

 

[Idok]

It would make a clean engine compartment but why not just use one side exhaust pipe. A lot of pro riders have just one side exhaust only.

Unless you are like me and can't stand things that arn't symetrical

thats a curse that I share with you

 

[Mark44]

h

It would make a clean engine compartment but why not just use one side exhaust pipe. A lot of pro riders have just one side exhaust only.

Unless you are like me and can't stand things that arn't symetrical

Why no paint on both sides of your hood then. :haha: :haha: :haha: :haha:

Mark44:biggrin:

 

[Speedfreak]

I don't roll that way

 

[demolition_x]

i would just get the tee welded to the end of the outlet.

 

[Speedfreak]

i would just get the tee welded to the end of the outlet.

Why do that then the whole project would be finished in about 15 minutes.. He needs to string this out for months............:bigeyes: