Custom/Hybrid Backie Chan build updated pics!

[Hollywood Hood]

More bling for ya!

 

[vshockey10]

What size is your reduction nozzle bored to? Sweet build. Interested to hear what size nozzle with the 7/15

 

[Hollywood Hood]

What size is your reduction nozzle bored to? Sweet build. Interested to hear what size nozzle with the 7/15

Reduction 86 exit 91

 

[Hollywood Hood]

Update


OCD solutions bilge switch another week for my hull technical difficulties

 

[Hollywood Hood]

Reduction nozzle and exit complete

 

[BrightE's]

Autobot pump, solid move.

 

[Hollywood Hood]

Autobot pump, solid move.

Autobot?

 

[Matt_E]

http://en.wikipedia.org/wiki/Autobot

 

[Chris03HD]

Transformers.

 

[txsuperjetfreak96]

i like that blue, what type of paint is it

 

[Hollywood Hood]

i like that blue, what type of paint is it

Indigo blue anodized powdercoat

 

[swannysxr]

Any updates Brian?

 

[Hollywood Hood]

Hopefully this week I will have the hull! I have no expectations so there's no disappointment anymore lol lets just say Steve's a busy guy and ill get it when I get it.....:brap:

 

[wrighteous]

Sick build! Curious of how you determined ur impeller and nozzle sizes im bout to put a 155 mag skat in rok r behind a 781 jetmaniac

Sent from my SCH-I510 using Tapatalk 2

 

[ADDict]

View attachment 214595
OCD solutions bilge switch another week for my hull technical difficulties

Is that ATP steering plate? Does the chin pad clear it?

Sent from my DROID RAZR using Tapatalk 2

 

[riprap]

Is that ATP steering plate? Does the chin pad clear it?

Sent from my DROID RAZR using Tapatalk 2

thats a good question, i dont think he test fit it yet. i know my xmetal chin pad is pretty damn close with the rrp plate. that atp setup is quite a bit more bulky. i bet it will rub a little

 

[Hollywood Hood]

Sick build! Curious of how you determined ur impeller and nozzle sizes im bout to put a 155 mag skat in rok r behind a 781 jetmaniac

Sent from my SCH-I510 using Tapatalk 2

Basically it's gonna be trial and error I talked to Brian at thrust Kyle at dasa and pat at xmetal and they are really rad dudes got some good info they were all really close to ballpark of each other on prop nozzle etc.. Gave them all the exact setup I was running and we came up with a 7/15 pitch if not dead nuts It's a good starting point . Reduction 86 exit 91. Hope that helps. Pfp total loss 48's 8 mil 863pv mag setback 155

 

[Pablo]

That prop should be real close. I'm running a 8mil Dasa/lamey 862 (210 psi) with 48's, PFP, and 144 mag. Recommended for me was 9/15-10/15 with 85.5 nozzle and 90 steering nozzle. That 155 pump will be nice.

 

[Hollywood Hood]

Might be picking her up tomorrow!

 

[Hollywood Hood]

Is that ATP steering plate? Does the chin pad clear it?

Sent from my DROID RAZR using Tapatalk 2[/QUO

had to trim down the chin pad im also running atp riser bars so they forsure didnt clear no big deal took 5 min