What pipe

[waxhead]

Is there a pipe that fits the lamey pv cylinder with out modding
i think the r&d one does
i am not sure about the low end response of these pipes as well as the fact they tend to fall apart all the time
anyone else
chuckie , tricky , paul

 

[Mark44]

I believe Magoo can answer that. Wish I could.

Mark44

 

[waxhead]

I was thinking about pving my ski but just dont want to muck around with the b-pipe
i know the type 9 will not work

 

[vomitspot]

i have the rd dry i will swap for the 9 dont know if it will fit though

 

[waxhead]

ok
we maybe be able to work a deal if you are interested
do you have pics of your dry pipe

 

[Big Kahuna]

speedwerx, but you have to massage it a little bit with a "Wham, Whack" with a rubber mallet and a 2x4.........

 

[waxhead]

im concerned about the speedwerx
dont they have trouble with fitting on a stock boat

 

[matty180]

I run a R&D dry pipe with the water injection and it makes good low end power. My motor has 205 psi. I have yet to have a problem with this pipe. I love the power.This is on a ported 61x cylinder. I have heard about problems with cracking but not experienced any. I can sed you some pics if you need them.

Thanks Matt

 

[waxhead]

My ignition system has a built in water injection system so thats not an issue

yes can you post some pics please

 

[Big Kahuna]

im concerned about the speedwerx
dont they have trouble with fitting on a stock boat

easier to install that the TYPE 4 Drypipes......... May have to notch the Lord Mount Tabs to get everything lined up correctly..... you should not have to worry about grinding the sides of the hull by the hood seal area like you do with the FPP. Plus, you will be able control your timing at higher rpm's with your ignition...........

 

[IceRocket1286]

speedwerx pipe is sexy. use it.

 

[matty180]

I hope this helps. I can take some more pics tommorow for you or some measurements if you need it.But I think this pipe should clear the powervalves since R&D made those cylinders and I think this was the pipe Jacobs ran on his ski.

 

[tricky1]

I have used the R&D and the SpeedWerx pipes on the PV Lameys. You have to mod them both to fit.

 

[douglee25]

Wax, why don't you just run the spacer for the Bpipe? That avoids the modification all together.

Doug

 

[waxhead]

you still have to mod the manifold if you use the spaced dont you ??

Tricky whats the best you have found in your experience

 

[douglee25]

you still have to mod the manifold if you use the spaced dont you ??

Tricky whats the best you have found in your experience

I don't believe so?

Doug

 

[waxhead]

ok thats sounding interresting
the only thing with spacing your pipe is you make your exhaust longer and thus effects your pipe tuning

 

[douglee25]

Wax,

You have me second guessing myself now. I'm not sure anymore? lol

Doug

 

[Water Worx]

How about the wad extractor system ????

 

[steve802cc]

you still have to mod the manifold if you use the spaced dont you ??

Tricky whats the best you have found in your experience

I don't believe so?

Doug

Couple of pics to help you out.