Super Jet bore out nozzle/new look

[tnt01]

blue print pump

ok did some searching again and found alot good than bad so i went and broke out the demel tool which i think it really suck for grinding down the imperfection on the pump so i went a air tool and a cutting bit...beware if your going to use the bit it cut fast...all in all it turn out pretty good....now all i need to do is use the demel to smooth it out then maybe polish the pump....

pump

here the tool

now i can wait for winter to be over:rant:

 

[BruceSki]

I used the same exact bit to do mine. It gets galled up with aluminum quickly though. Had to scrape pieces of aluminum out of it every few minutes so it would cut again.

 

[txsuperjetfreak96]

yeah i was looking for one of those, didnt have one or the money to buy it. So i just used the ole dremmel, with sanding drums took forever but i got it.

 

[tnt01]

yeah i was looking for one of those, didnt have one or the money to buy it. So i just used the ole dremmel, with sanding drums took forever but i got it.

i try the demel and it took to long,then i remember i have the cutting bit.i still used the demel to smooth the cuts.....

here how it turn out i didn't really smooth it out cause from what i read it will work better then having smooth surface so it kind of smooth...don't ask why but i just went with what i read....

 

[FearMyWrX]

dude your going to need a.....HOOKER......for your.......BORE.......job.:naughty:lmao

Damn, if I known you would have needed a stubby cone I would have hooked you up with min. I upgraded to a mag so I don't need mine anymore.

 

[tnt01]

Damn, if I known you would have needed a stubby cone I would have hooked you up with min. I upgraded to a mag so I don't need mine anymore.

what are u looking to get for your nozzle?

 

[FearMyWrX]

I still need my nozzle, just don't need the cone that attaches to the stator. Are you talking about the Stator? The part with the 6 veins?

 

[tnt01]

I still need my nozzle, just don't need the cone that attaches to the stator. Are you talking about the Stator? The part with the 6 veins?

my mistake,sorry the stubby cone,what are u looking to get for the cone

 

[#ZERO]

So you spent around $24.99 for the sanding drum set plus $7.99 for each grit sand paper sleeve set with a grand total of around fifty bucks in parts plus your time, tools and labor?

 

[txsuperjetfreak96]

u da man zero, u did mine awsome job quick turn around, can u bore the b-pipe manifolds, and head pipes

 

[tnt01]

So you spent around $24.99 for the sanding drum set plus $7.99 for each grit sand paper sleeve set with a grand total of around fifty bucks in parts plus your time, tools and labor?

the only stuff i paid for is the drums to bore my nozzle everything else i had laying around in my tool box from my last sport bike build...the season for riding is over so i just decide to learn some stuff and to know what my ski have...better time than winter time....

 

[IS0LD0UT]

I did a pair a couple weeks ago with my cordless drill and a flapper wheel. Took about 45 mins each. Your method looks much easier, was it any faster?

Did you find a flapper wheel locally? Where. Did you use a 3.5"?

 

[tnt01]

i just upgrade my backup sj head.thanks again to Chris @ jetmaniac for making happen....

from this

to this

 

[tnt01]

new look for the back up ski,thank derrick from dk1,i'm done with my back up ski,for now:laugh2:

 

[Mdavies_02]

I would like to point out that your backup ski is far to nice.

Great work on the nozzle and the blue printing. Looks real sharp.

 

[tnt01]

that what my buddy and wife said too,here my main ski

I would like to point out that your backup ski is far to nice.

Great work on the nozzle and the blue printing. Looks real sharp.

 

[Mdavies_02]

I don't to many skis without lowered hoods that I like, and you are sporting two beauties.

 

[ph1lthy11y]

question have you rode it with the bored out nozzle ? is it worth it ? did you notice it ?

 

[tnt01]

no i haven't rode it yet,but my main ski had the same set up,being worth it i say yes,it dose give u alot of low end brappppp

 

[ph1lthy11y]

ok cool thinking of doing this to my ski thanks man