Super Jet Why Doesnt my Epic work?
- Thread starter munki63
- Start date
OCD Solutions
Original, Clean and Dependable Solutions
- Location
- Rentz, GA
did you install a switch? If so, it won't connect if the switch is selected to ground or "curve B", also, is your lanyard plugged in?
OCD Solutions
Original, Clean and Dependable Solutions
- Location
- Rentz, GA
:biggrin: Now ask me how I knew that... :banghead:
- Location
- South Florida
I had trouble getting mine to connect to the computer on my workbench. First I couldn't get my computer to let me choose which driver I wanted then it still wasn't working. Then suddenly it was working and I loaded the curve then to make sure it was right I changed the curve on the screen and loaded the curve back from the epic. Then suddenly the connection stopped working and I could never get it to work again.
At least I got my curve loaded but I dread the next time I try to change it.
At least I got my curve loaded but I dread the next time I try to change it.
jetnut_118
Blackjack Performance
- Location
- Grand Rapids
My buddy just bought one and we cant get it to work it keeps poping fuses.
OCD Solutions
Original, Clean and Dependable Solutions
- Location
- Rentz, GA
There have been a few different issues with them but that is the first time I've heard of fuses popping. Do a seach on the EPIC, there are a few different threads going now with lots of info. I would start by verify all your wiring and connections, being mindfull of the possibility of a pinched or shorted wire. Have you tried connecting up your old CDI to see if it works still? That would help rule out the CDI and narrow down the issue.
http://www.x-h2o.com/threads/92450-some-epic-wiring-questions&highlight=epic+wiring
All Epics are tested before being shipped, its not impossible that a fault could develop in the meantime but more likely a wiring problem.
Chris.
Chris.
Negative