FX-1 Yamaha fx1 pump build

B

benny boy

Location
essex
I am in the process of doing a pump conversion on my fx1 I have a 140 kawasaki pump I don't have the shoe that the pump slides in to I was wondering if I could cut the square plate off the end and shape the end and machine the inside of the yamaha fx1 pump shoe so that the pump slots in could anybody help please
 
VXSXH20

VXSXH20

Sionis Industries
Location
Mid-Atlantic
try to trade up with someone needing a 750 pump. Life will be sooo much easier on you. i know it sucks, but many have been thru it already. Goodluck
 
Joker

Joker

...chaos? Its Fair!
Location
La Porte, Indiana
I just did this swap and using a 650 pump was really easy. On PWC today I'm sure some of the x2 guys would take that for trade on a 650 one
 
B

benny boy

Location
essex
Thanks lads that's cool I will see what I can do can you just tell me what parts I would need as well so I can make sure I get it all together thanks again
 
dankyfx1

dankyfx1

Location
Havasu
So guys I'm new xh20, I have been reading a few of the FX pump conversions threads, someone please tell me if I am on the right track here... I have a 650 pump laying around, planning on using that. what I don't know is if I need a zxi driveshaft, or a fx driveshaft works? Ive read about people using both. Also, stock pump shoe or use the 650? Im not good with doing glass work... any help here please?
 
VXSXH20

VXSXH20

Sionis Industries
Location
Mid-Atlantic
a zxi 900 or 1100 dshaft will work as theyre the same. The midshaft housing will be reused. however it has to be fitted with a different bearing or have a kawi bearing block machined down to fit inside the yami housing, The 650 kawi pump already has the shoe on the pump case. thus a easier and cheaper choice for the pump upgrade. plus it fits the hull pretty tight and flush. Read Up on the Pump install threads.

http://www.x-h2o.com/threads/10462-Another-dang-FX1-pump-thread&highlight=not+another+pump+swap
 
You must log in or register to reply here.
Top Bottom