Yam engine in SXR full carbon

[loictahiti]

so, may be , because , my english is very bad, but i'vent found nothing, on these engine bed plate convertion on the forum.
i'll want to put an Yam engine in SXR hull, some freeriders do that, and I'll want to see what they have done. so, I remember, some one make some for sale.
if you have links or other

thanks a lot

 

[1550]

I have similar project by myself also, and i havent found any ready bedblates for that. But it is quite close when using stock yamaha bedplates and motormounts. It need little bit shimming and new holes for motormounts.

 

[3rid]

here you go loic...
http://www.x-h2o.com/threads/47354

Max has the same one.

 

[ADDict]

here you go loic...
http://www.x-h2o.com/threads/47354

Max has the same one.

I have run these bedplates and so have several others with good results. I put a ported 701 in an X2 and had no trouble!

 

[loictahiti]

here you go loic...
http://www.x-h2o.com/threads/47354

Max has the same one.

thanks a lot mon ptit hollandais :love:

 

[x2skier]

so, may be , because , my english is very bad, but i'vent found nothing, on these engine bed plate convertion on the forum.
i'll want to put an Yam engine in SXR hull, some freeriders do that, and I'll want to see what they have done. so, I remember, some one make some for sale.
if you have links or other

thanks a lot

Don't make it too difficult on yourself. This same kit I made for my X2 will work for any 650/750/800 Kawi hull. I sold it but it can easily be duplicated with off the shelf parts.