rideit516
RTF-MIKE
- Location
- Long Island
Super Jet x scream water box/rad dudes exhaust tube in a square
- Thread starter rideit516
- Start date
icecoled007
Captain of this ship
- Location
- Colorado
Naw your probably the first.
It should fit, keep pushing
It should fit, keep pushing
rideit516
RTF-MIKE
- Location
- Long Island
oh i got her in there
That's what she said. :clown:
dragginblazer
Do Good Jetski Crew
- Location
- North Richland Hills, TX
I tried to put one in my square but it wouldnt have been easy. So I put the stock junk back in and the xmetal box back on the shelf.
rideit516
RTF-MIKE
- Location
- Long Island
It fits, just real tight.
Byeai
"Cheetos-Man"
- Location
- Melbourne FL
I want a x metal box in my square
Sent from my SAMSUNG-SGH-I897 using Tapatalk 2
Sent from my SAMSUNG-SGH-I897 using Tapatalk 2
- Location
- CT
I would cut that sharp bend right off the xscream box and run it like a round nose with a smooth 90. That is one thing on that box I have never been a fan of.
- Location
- Edmonton, AB
I was very disappointed with my rad dudes exhaust. The supplied silicone elbow does not fit with an xmetal water box, the exhaust passes right over the battery. If I had any other battery besides a ballistic it wouldn't fit. We also ordered a kit for my buddy's XFS and there's no way it will fit
- Location
- CT
Is the xfr that different than a FR2 Rickter? I run one in mine
And the xmetal box has the 90 built on it it. The tube kit comes with a 90, so you would just need a straight 2.25 coupler on the front side. But still need the 2.25 to 2.5 coupler on the rear.
And the xmetal box has the 90 built on it it. The tube kit comes with a 90, so you would just need a straight 2.25 coupler on the front side. But still need the 2.25 to 2.5 coupler on the rear.
- Location
- NH
Is there any rooms for breather tubes? I building a square and using and Rad Dudes tube and im jumping all over the place with what waterbox to use.
Will
Will
- Location
- CT
Art says to run a stock water box.
- Location
- NH
Ya it would be sweet If i could find one. haha. I want a stock RN. You got one mark?
Will
Will
x2 thats what I had to do with my build. The outlet would be to close to the side of the ski. Worked like a charm .
rideit516
RTF-MIKE
- Location
- Long Island
Plenty of room for breathers. I changed my exhaust tube out the back to a big tube also. Runs great and not too loud
get a reducer for silicone parts .com for the 2.5 inch exhaust and then reduce it to 2 inch. it will fit i have the dual exhaust on my Square nose. i also changed my battery out to a shorial so if the big lead battery is giving you problems with fitting you might want to thing of using something new.