would this work(exhaust hose question)

[Gainera2582]

Since my stocker was cut down about half an inch short, I was thinking about using an adapter between the waterbox and chamber on the stock hose that is smaller to make a tighter fit.


Obviously im going to cut it down more on the end, but would there be any probs?

Thanks

 

[x-jetter]

nope, that's how i have my x-jet set up. not a problem at all, and actually makes installing the bpipe MUCH easier.

 

[sflsurfrider]

i would put a stainless or aluminum sleeve in the i.d of the smaller hose so the clamp has something solid to "stop" on instead of just rubber on rubber.

itll work great!

 

[Gainera2582]

Got it guys, thanks for the help!!!!!!

 

[x-jetter]

i would put a stainless or aluminum sleeve in the i.d of the smaller hose so the clamp has something solid to "stop" on instead of just rubber on rubber.

itll work great!

well i was assuming he was cutting off smaller diameter hose flush with the larger diameter hose. the way i have mine is there is only one hoseclamp, which is on the stinger where it's supposed to be. i just have the wrong size hose, so i have a smaller diameter hose on the stinger, then clamp down both pieces to the stinger. (the stinger is my "sleeve") if you're going to clamp those two together without being directly on the stinger, then yes, you'll need a sleeve on the i.d. like sfl said.